Skip to main content

Floor temperature controller with remote sensor, flush-mounted, 10-50°C, alre frame, cover 50x50mm, pure white, glossy

FETR 101.715#21

Floor temperature controller with remote sensor, flush-mounted, 10-50°C, alre frame, cover 50x50mm, pure white, glossy

This electronic two-point controller has been specially developed for controlling electric (max. 3680 W) or hot water heaters/additional heaters for floors and other surface temperature control systems. Remote sensor HF-8/4-K2 (4 m) included in the scope of delivery. The heating is switched off in the event of a sensor break or short circuit. The temperature reduction input can be used to set the temperature to approx. 5 K lower (night reduction).
  • Art.-Nr.: UN030109

    Technical data

    Actual temperature display No
    Additional heating switch No
    Ambient temperature 0 … 40 °C
    Assembly complete device
    Bearing temperature –20 … 70 °C
    Colour pure white
    Control behaviour 2-point
    Control range 10 … 50 °C
    Cooling control function No
    Design Berlin UP
    Dimensions (W x H x D) 81 mm x 85 mm x 42,5 mm
    Display No
    ECO function (reduction) Yes
    ECO input (reduction) 230 VAC, 50 Hz
    ECO temperature reduction approx. 5 K
    Electric connection screw terminals
    Electronic control Yes
    Energy efficiency class I
    External setting Yes
    Heating control function Yes
    Housing material plastic PC
    Internal setting No
    Max. air humidity (non-condensing) 95 % r.H.
    Max. switching current 16 (2) A
    Max. switching voltage 230 VAC, 50 Hz
    Mechanical range reduction Yes
    Medium Air
    Min. switching voltage 230 VAC, 50 Hz
    Montage/Befestigung flush mounting (deep socket recommended)
    Number of control ranges 1
    Number of outputs 1
    Number of outputs, heating 1
    Operating voltage 230 VAC, 50 Hz
    Operation rotary knob and switches
    Output signal switching
    Potential free switching contact No
    Protection class II, following appropriate mounting
    RAL colour number (similar) 9010
    Safety and EMC in accordance with DIN EN 60730
    Scale Index number scale 1…5
    Schalter Ein/Aus Yes
    Schalter Heizen/Kühlen No
    Sensor element NTC external
    Sensor external Yes
    Surface finish gloss
    Switch/lamp night-time reduction No
    Switching contact normally open contact
    Switching difference, can be adjusted No
    Switching differential 0,5 … 1 K
    Switching element relay
    Switching power 3680 W
    Temperature controller version underfloor temperature controller
    Type of wiring other
    With receiver No

    Downloads

    Assembly instructions

    Datasheet

    Photo Type Articlenumber Features Kind
         

    Kontaktanfrage

        This form is currently undergoing maintenance. Please try again later.    

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu