RTKSA-001.301
Universal capillary thermostat, 20…150…°C, hysteresis 3.3K, TW, internal setting
Art.-Nr.: KA000103
Technical data
| Ambient temperature, upper value | 80 °C |
| Bearing temperature, lower value | -30 °C |
| Bearing temperature, upper value | 80 °C |
| Capillary length | 2 m |
| Colour | Anthr. grey (RAL7016), frontp. transp. |
| Contact interlocking | No |
| Control range, lower value | 20 °C |
| Control range, upper value | 150 °C |
| Cooling control function | Yes |
| Depth | 57,5 mm |
| Device version | Surface-mounted unit |
| Diameter sensor element | 6 mm |
| Electric connection | Push-in terminal |
| Electronic control | No |
| External reset | No |
| External setting | No |
| Function type (systems engineering) | TW |
| Heating control function | Yes |
| Height | 146,8 mm |
| Internal setting | Yes |
| Length of sensor | 82 mm |
| Max. sensor temperature | 177 °C |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | O: 16 (2,5) A; S: 6,3 (2,5) A, 0,25 ADC |
| Maximum switching voltage | 230 V AC 50 / 60 Hz, 230 V DC |
| Minimum switching current | At 24 V (AC/DC) min. 100 mA |
| Minimum switching voltage | 24 V AC / 50 Hz, 24 V DC |
| Mounting / attachment | In imm. sleeve, prot. coil, on tube, etc |
| Number of control ranges | 1 |
| Number of outputs | 2 |
| Operating voltage | None |
| Operation | Internal setpoint adjuster |
| Output signal | Switching |
| Potential free switching contact | Yes |
| Protection class | I |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sensor element | Capillary tube |
| Sensor material | Cu |
| Switching contact | Two-way contact |
| Switching difference | 3.3 K |
| Switching difference, can be adjusted | No |
| Switching element | Microswitch |
| Type of protection | IP40 |
| Width | 53 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 | THK-2-120 | KA969902 | Immersion sleeve, 120mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
 | JZ-29 | KA999901 | Fastening set for RTKSA THK/NTHK/SWK single controller | Accessories |
| THK-2-280 | KA969904 | Immersion sleeve, 280mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
 | SWK-2-100 | KA989901 | Protective coil, 100mm, nickel-plated steel, inner x outer diameter 10.5x17mm | Accessories |
| NTHK-2-200 | KA969908 | Immersion sleeve, 200mm, V4A (1.4571), inner x outer diameter 7.5x10mm | Accessories |
 | JZ-31 | KA999903 | Fastening set for RTKSA tube mounting for contact controller | Accessories |
| NTHK-2-120 | KA969907 | Immersion sleeve, 120mm, V4A (1.4571), inner x outer diameter 7.5x10mm | Accessories |
 | JZ-33 | KA999904 | Sealing set for universal capillary thermostats RTKSA-xxx.xxx | Accessories |
| SWK-2-200 | KA989903 | Protective coil, 200mm, nickel-plated steel, inner x outer diameter 10.5x17mm | Accessories |
| NTHK-2-100 | KA969906 | Immersion sleeve, 100mm, V4A (1.4571), inner x outer diameter 7.5x10mm | Accessories |
| THK-2-200 | KA969903 | Immersion sleeve, 200mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
| THK-2-100 | KA969901 | Immersion sleeve, 100mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
| THK-2-600 | KA969905 | Immersion sleeve, 600mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
| NTHK-2-280 | KA969909 | Immersion sleeve, 280mm, V4A (1.4571), inner x outer diameter 7.5x10mm | Accessories |
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
