Skip to main content

JSF flow monitor for 1/2″

You are here: Industrial technology / Humidity, flow, pressure, monitoring / Flow monitors for liquid media

JSF-3 E

JSF flow monitor for 1/2″

This flow monitor was specially developed for monitoring the flow of liquid media. The monitor is typically used in machine and apparatus construction, for monitoring oil, cooling, and lubrication circuits, or as low-water protection in sprinkler systems, heating systems, chillers, and heat pumps. The unit is installed vertically in a horizontal pipe. The calming distance must be at least 5 times the pipe diameter upstream and downstream of the paddle. The maximum flow can be considerably higher than the max. setting the value of the monitor. Not tested for drinking water.
Attached T-piece made from grey cast iron.
    • Art.-Nr.: JA060500

    Technical data

    Ambient temperature, lower value -40 °C
    Ambient temperature, upper value 85 °C
    Assembly Flow monitor, T-piece, paddle set
    Bearing temperature, lower value -40 °C
    Bearing temperature, upper value 85 °C
    Carrier material Ms nickel-plated
    Colour Grey
    Degree of contamination 2
    Depth 71 mm
    Electric connection Screw terminals
    Function type (systems engineering) Monitor
    Height 67 mm
    Housing material Plastic
    Internal setting Yes
    Max.pressure 500000 Pa
    Maximum air humidity (non-condensing) 95 % r.H
    Maximum switching current 15 (8) A
    Maximum switching voltage 230 V AC, 50 Hz
    Medium Fluid, not aggressive
    Medium temperature 120 °C
    Minimum switching current 150 mA
    Minimum switching voltage 24 V AC / 50 Hz
    Mounting / attachment Pipe mounting
    Number of control ranges 1
    Operating voltage None
    Output signal Switching
    Paddle material Stainless steel
    Pipe dimension 1/2″
    Potential free switching contact Yes
    Protection class I
    RAL colour number (similar) 7016/7035
    Safety and EMC In accordance with DIN EN 60730
    Sensor element Flow paddle
    Surface properties Matt
    Switching contact Two-way contact
    Switching element Microswitch
    Switching power 3450 W
    Test mark approval Type-tested by TÜV
    Type of protection IP65
    Width 130 mm
    With explosion protection No
    Circuit diagram Circuit diagram

    Downloads

    Instructions

    Datasheet

    Photo Type Articlenumber Features Kind
    JZ-09 E6140170 Replacement paddle (4 pcs), from 1"... 8" for JSF flow monitor Spare part
     

    Contact request

      This form is currently undergoing maintenance. Please try again later.

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Send contact request
    Close Menu