EKFP 1000/100
Built-in duct temperature sensor, PT1000, installation length 115mm
The EKF built-in duct sensors are used to measure temperatures in liquids and gases in pipelines, air ducts, or containers. For use in air ducts, the mounting flange (MF) is required. For use in liquids, nickel-plated brass immersion sleeves (THMs) must be used. For aggressive media, immersion sleeves made of stainless steel V4A (THV) are recommended. Immersion sleeves or mounting flange are not included in the scope of delivery and must be ordered separately as accessories.
Art.-Nr.: G9140150
Technical data
| Active temperature measurement | No |
| Ambient temperature, lower value | -30 °C |
| Ambient temperature, upper value | 70 °C |
| Bearing temperature, lower value | -30 °C |
| Bearing temperature, upper value | 70 °C |
| Colour | Pure white |
| Connection cross-section | 0,14 mm² bis 2,5 mm² |
| Cover fastening | Bayonet fastening |
| Electric connection | Screw terminals |
| Housing material | Plastic PA (30 % GF reinforced) |
| Length of sensor | 100 mm |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Mounting / attachment | In imm. sleeve, prot. coil, on tube, etc |
| Passive temperature measurement | Yes |
| Plug-in length | 115 mm |
| Protection class | III |
| RAL colour number (similar) | 9010 |
| Safety and EMC | In accordance with DIN EN 60730 |
| Sensor element | PTC internal |
| Sensor element inside the housing | No |
| Sensor element outside the housing | Yes |
| Sensor type | PT-1000 |
| Suitable for duct mounting | Yes |
| Suitable for fluids | Yes |
| Suitable for gases | Yes |
| Suitable for pipe mounting | Yes |
| Surface properties | Gloss |
| Temperature measuring range lower value | -30 °C |
| Temperature measuring range upper value | 150 °C |
| Version of sensor | Temperature sensor for gases/liquids |
| With explosion protection | No |
| With housing | Yes |
| With supply line | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 |
THMs/100 | G9990020 | Immersion sleeve, 100mm, nickel-plated brass with insertion, inner x outer diameter 6.5x8mm | Accessories |
 |
MF | G9990160 | Mounting flange for built-in duct sensor EKF/IKF/GFL | Accessories |
 |
THV/100 | G9990070 | Immersion sleeve, 100mm, V4A 1.4571, inner x outer diameter 6.3x9mm | Accessories |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
