EKFP 100/100
Built-in duct temperature sensor, PT100, installation length 115mm
The EKF installation duct sensors are used to measure temperatures in liquids and gases in pipes, air ducts or containers. The mounting flange (MF) is required for use in air ducts. Nickel-plated brass thermowells (THMs) must be used for use in liquids. Immersion sleeves made of stainless steel V4A (THV) are recommended for aggressive media. Thermowells or mounting flanges are not included in the scope of delivery and must be ordered separately as accessories.
Art.-Nr.: G9140140
Technical data
| Active temperature measurement | No |
| Ambient temperature | −30 … 70 °C |
| Bearing temperature | –30 … 70 °C |
| Colour | pure white |
| Connection cross-section | 0,14 – 2,5 mm² |
| Cover fastening | bayonet fastening |
| Dimensions (W x H x D) | 58 mm x 64 mm x 149 mm |
| Electric connection | screw terminals |
| Housing material | plastic PA |
| Length of sensor | 100 mm |
| Max. air humidity (non-condensing) | 95 % r.H. |
| Montage/Befestigung | in imm. sleeve, prot. coil, on tube, etc |
| Passive temperature measurement | Yes |
| Plug-in length | 115 mm |
| Protection class | III |
| RAL colour number (similar) | 9010 |
| Safety and EMC | in accordance with DIN EN 60730 |
| Sensor element | PTC internal |
| Sensor element inside the housing | No |
| Sensor element outside the housing | Yes |
| Sensor type | PT-100 |
| Suitable for duct mounting | Yes |
| Suitable for fluids | Yes |
| Suitable for gases | Yes |
| Suitable for pipe mounting | Yes |
| Surface finish | gloss |
| Version of sensor | temperature sensor for gases/liquids |
| With explosion protection | No |
| With housing | Yes |
| With supply line | No |
| Photo | Type | Articlenumber | Features | Kind |
|---|
Kontaktanfrage
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
