RTKSA-002.410
Universal capillary thermostat, 30…110…°C, hysteresis -10…-15K, TB, internal setting, external resetting
This series of devices has been specially developed for use in heating technology in boiler systems or storage tanks, district heating transfer stations and heat transfer systems, in ventilation technology as supply air monitors or as limiters of electric heating registers as well as for controlling and monitoring temperatures on pipes and tanks. Immersion sleeves, protective coils, and fixing sets are not included in the scope of delivery. The JZ-29 fixing set must be used in conjunction with immersion sleeves or protection coils. When used as a pipe-mounted controller, the JZ-31 fixing set must be used.
Art.-Nr.: KA000200
Technical data
| Ambient temperature, upper value | 80 °C |
| Bearing temperature, lower value | -30 °C |
| Bearing temperature, upper value | 80 °C |
| Capillary length | 2 m |
| Colour | Anthr. grey (RAL7016), frontp. transp. |
| Contact interlocking | Yes |
| Control range, lower value | 30 °C |
| Control range, upper value | 110 °C |
| Cooling control function | Yes |
| Depth | 62,9 mm |
| Device version | Surface-mounted unit |
| Diameter sensor element | 6 mm |
| Electric connection | Push-in terminal |
| Electronic control | No |
| External reset | Yes |
| External setting | No |
| Function type (systems engineering) | TB |
| Heating control function | Yes |
| Height | 146,8 mm |
| Internal setting | Yes |
| Length of sensor | 72 mm |
| Max. sensor temperature | 126 °C |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | O: 16 (2,5) A; S: 2 (0,4) A, 0,25 ADC |
| Maximum switching voltage | 230 V AC 50 / 60 Hz, 230 V DC |
| Minimum switching current | At 24 V (AC/DC) min. 100 mA |
| Minimum switching voltage | 24 V AC / 50 Hz, 24 V DC |
| Mounting / attachment | In imm. sleeve, prot. coil, on tube, etc |
| Number of control ranges | 1 |
| Number of outputs | 2 |
| Operating voltage | None |
| Operation | Internal setpoint adjuster |
| Output signal | Switching |
| Potential free switching contact | Yes |
| Protection class | I |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sensor element | Capillary tube |
| Sensor material | Cu |
| Switching contact | Two-way contact |
| Switching difference | Manual reset after -10 K … -15 K |
| Switching difference, can be adjusted | No |
| Switching element | Microswitch |
| Type of protection | IP54 |
| Width | 53 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 | NTHK-2-280 | KA969909 | Immersion sleeve, 280mm, V4A (1.4571), inner x outer diameter 7.5x10mm | Accessories |
| NTHK-2-120 | KA969907 | Immersion sleeve, 120mm, V4A (1.4571), inner x outer diameter 7.5x10mm | Accessories |
 | JZ-33 | KA999904 | Sealing set for universal capillary thermostats RTKSA-xxx.xxx | Accessories |
 | JZ-31 | KA999903 | Fastening set for RTKSA tube mounting for contact controller | Accessories |
 | SWK-2-200 | KA989903 | Protective coil, 200mm, nickel-plated steel, inner x outer diameter 10.5x17mm | Accessories |
| NTHK-2-100 | KA969906 | Immersion sleeve, 100mm, V4A (1.4571), inner x outer diameter 7.5x10mm | Accessories |
| THK-2-200 | KA969903 | Immersion sleeve, 200mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
| THK-2-100 | KA969901 | Immersion sleeve, 100mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
| THK-2-600 | KA969905 | Immersion sleeve, 600mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
| THK-2-120 | KA969902 | Immersion sleeve, 120mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
 | JZ-29 | KA999901 | Fastening set for RTKSA THK/NTHK/SWK single controller | Accessories |
| THK-2-280 | KA969904 | Immersion sleeve, 280mm, nickel-plated brass, inner x outer diameter 7.5x10mm | Accessories |
| SWK-2-100 | KA989901 | Protective coil, 100mm, nickel-plated steel, inner x outer diameter 10.5x17mm | Accessories |
| NTHK-2-200 | KA969908 | Immersion sleeve, 200mm, V4A (1.4571), inner x outer diameter 7.5x10mm | Accessories |
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
