RTKSA-010.200
Universal capillary double thermostat, TR 0…120…°C, STB 70…130…°C, hysteresis TR=3K STB=-10…-15K
This series of devices was specially developed for use in heating technology in boiler systems or storage tanks, district heating transfer stations and heat transfer systems, in ventilation technology as supply air monitors or as limiters for electric heating registers. Immersion sleeves/protection coils are not included in the scope of delivery. The JZ-30 accessory must be used in conjunction with immersion sleeves or protection coils.
The control range / hysteresis is 0… 120 ° C / 3K for the temperature controller and 70… 130 ° C / -10… -15K for the safety temperature limiter.
Art.-Nr.: KA001000
Technical data
| Ambient temperature, upper value | 80 °C |
| Bearing temperature, lower value | -30 °C |
| Bearing temperature, upper value | 80 °C |
| Capillary length | 2 m |
| Colour | Anthr. grey (RAL7016), frontp. transp. |
| Contact interlocking | Yes |
| Control range, lower value | 0 °C |
| Control range, upper value | 120 °C |
| Cooling control function | Yes |
| Depth | 66,7 mm |
| Device version | Surface-mounted unit |
| Diameter sensor element | 6 mm |
| Electric connection | Push-in terminal |
| Electronic control | No |
| External reset | Yes |
| External setting | Yes |
| Function type (systems engineering) | TR/STB |
| Heating control function | Yes |
| Height | 146,8 mm |
| Internal setting | Yes |
| Length of sensor | Mm |
| Max. sensor temperature | 138 °C |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | O: 16 (2,5) A; S: 6,3 (2,5) A, 0,25 ADC |
| Maximum switching voltage | 230 V AC 50 / 60 Hz, 230 V DC |
| Minimum switching current | At 24 V (AC/DC) min. 100 mA |
| Minimum switching voltage | 24 V AC / 50 Hz, 24 V DC |
| Mounting / attachment | In imm. sleeve, prot. coil, on tube, etc |
| Number of control ranges | 2 |
| Number of outputs | 4 |
| Operating voltage | None |
| Operation | Rotary knob, reset button |
| Output signal | Switching |
| Potential free switching contact | Yes |
| Protection class | I |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sensor element | Capillary tube |
| Sensor material | Cu |
| Switching contact | 2 two-way contacts |
| Switching difference | TR: 3 K ; STB: -10 K … -15 K |
| Switching difference, can be adjusted | No |
| Switching element | Microswitch |
| Type of protection | IP40 |
| Width | 106 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 | THK-2-200x17 | KA979902 | Immersion sleeve, 200mm, nickel-plated brass, inner x outer diameter 14.8x17mm | Accessories |
 | SWK-2-100 | KA989901 | Protective coil, 100mm, nickel-plated steel, inner x outer diameter 10.5x17mm | Accessories |
| NTHK-2-200x17 | KA979904 | Immersion sleeve, 200mm, V4A (1.4571), inner x outer diameter 14.8x17mm | Accessories |
 | JZ-30 | KA999902 | Fastening set for RTKSA THK/NTHK/SWK double controller | Accessories |
| SWK-2-200 | KA989903 | Protective coil, 200mm, nickel-plated steel, inner x outer diameter 10.5x17mm | Accessories |
| THK-2-100x17 | KA979901 | Immersion sleeve, 100mm, nickel-plated brass, inner x outer diameter 14.8x17mm | Accessories |
| NTHK-2-100x17 | KA979903 | Immersion sleeve, 100mm, V4A (1.4571), inner x outer diameter 14.8x17mm | Accessories |
 | JZ-33 | KA999904 | Sealing set for universal capillary thermostats RTKSA-xxx.xxx | Accessories |
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
