Skip to main content

Wireless heating actuator for mounting in heating circuit distributor, 4-channel, IP20

HTFRL-214.240

Wireless heating actuator for mounting in heating circuit distributor, 4-channel, IP20

Wireless actuators (wireless heating controllers) that implement individual room temperature control in conjunction with alre wireless room temperature sensors and the b@home gate. Application mainly in the renovation sector or for heating system extensions. The actuators can also be connected directly to the sensors without the b@home gate and thus implement individual room control.
4-channel wireless temperature actuator for mounting in heating circuit distributor. max. 3 valve actuators per channel can be connected directly / max. 11 actuators in total, including pump module, one time zone possible per channel, master-slave operation, calculation of average value with up to 8 measuring points. The upper part can be taken off to train the wireless sensors in the individual rooms. An optional commercially available 9V battery is needed for this. The channel selection button and training button allow the sensors to be trained with great ease.
  • Art.-Nr.: BA121400

    Technical data

    Ambient temperature, lower value-10 °C
    Ambient temperature, upper value50 °C
    Bearing temperature, lower value-20 °C
    Bearing temperature, upper value70 °C
    ColourAnthr. grey (RAL7016), frontp. transp.
    Control range, lower value5 °C
    Control range, upper value30 °C
    Cooling control functionNo
    Depth62 mm
    Display typeLED
    Electric connectionSpring push-lock terminals
    Heating control functionYes
    Height100 mm
    Housing materialPlastic PC
    Material qualityThermoplast
    Maximum air humidity (non-condensing)95 % r.H
    Maximum switching current3 (1) A
    Maximum switching voltage230 V AC, 50 Hz
    Minimum switching voltage230 V AC / 50 Hz
    Mounting / attachmentSurface mounting or standard rail
    Number of channels/zone4
    Number of outputs5
    Operating voltage230 V AC / 50 Hz
    OperationKey
    Output signalSwitching (230 V AC, 50 Hz)
    Potential free switching contactNo
    Protection classII, following appropriate mounting
    Radio frequency868,3 MHz
    Safety and EMCIn accordance with DIN EN 60730
    Surface propertiesGloss
    Switching contact5 normally open contacts
    Switching differenceApprox. 0.5 K (delta T max. 4 K/h)
    Switching element5 relays
    Switching power690 W
    Type of protectionIP20
    Width197 mm
    Wireless bidirectionalNo
    Wireless bus bus systemYes
    Wireless interfaceYes
    With additional contactYes
    With timerNo

    Downloads

    Assembly instructions

    Datasheet

    PhotoTypeArticlenumberFeaturesKind
    JZ-26BN990004Antenna cable 1m for external antennae JZ-25Accessories
    ZBOOA-010.185G8990010Valve actuator "Stella" 230V NC for the fully automatic hydraulic compensationAccessories
    ZBOOA-010.100H9100010Heating valve actuator, 230V AC, closed when de-energisedAccessories
    JZ-32BN990005Magnetic attachment set for terminal strips VOOPL-216.176 and VOOPL-318.178Accessories
    JZ-25BN990003External antenna for multi-channel actuators, surface-mounted super flatAccessories
     

    Contact request

      This form is currently undergoing maintenance. Please try again later.

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu