Skip to main content

Wireless heating actuator, flush-mounted, optional remote sensor


Wireless heating actuator, flush-mounted, optional remote sensor

Wireless actuators (wireless heating controllers) that implement individual room temperature control in conjunction with alre wireless room temperature sensors and the b@home gate. Application mainly in the renovation sector or for heating system extensions. The actuators can also be connected directly to the sensors without the b@home gate and thus implement individual room control.
1-channel wireless temperature actuator; for activating (electric) underfloor heating, the controller has a sensor input to which an optional remote sensor can be connected. This is recessed in the floor. When combined with a sensor like this, the following operating modes are possible: Underfloor control function or room temperature control function with underfloor monitor with direct or central setpoint specification (central control); if there is no remote sensor, the HTFRU-110.124 acts as a room thermostat with direct or central setpoint specification (central control).
  • Art.-Nr.: BA110201

    Technical data

    Ambient temperature, lower value-20 °C
    Ambient temperature, upper value50 °C
    Bearing temperature, lower value-20 °C
    Bearing temperature, upper value70 °C
    ColourPure white
    Control range, lower value5 °C
    Control range, upper value30 °C
    Cooling control functionNo
    Depth34,5 mm
    Display typeLED
    Electric connectionScrew terminals
    Heating control functionYes
    Height59,4 mm
    Housing materialPlastic PC
    Material qualityThermoplast
    Maximum air humidity (non-condensing)95 % r.H
    Maximum switching current10 A to 30°C
    Maximum switching voltage230 V AC, 50 Hz
    Minimum switching voltage230 V AC / 50 Hz
    Mounting / attachmentFlush mounting (deep socket recommended)
    Number of channels/zone1
    Number of outputs1
    Operating voltage230 V AC / 50 Hz
    Output signalSwitching (230 V AC, 50 Hz)
    Potential free switching contactNo
    Protection classII, following appropriate mounting
    Radio frequency868 MHz
    RAL colour number (similar)9010
    Safety and EMCIn accordance with DIN EN 60730
    Sensor elementNTC external
    Surface propertiesMatt
    Switching contactNormally open contact
    Switching differenceApprox. 0.5 K (delta T max. 4 K/h)
    Switching elementRelay
    Switching power2300 W
    Type of protectionIP20
    Width64,5 mm
    Wireless bidirectionalNo
    Wireless bus bus systemYes
    Wireless interfaceYes
    Circuit diagram Circuit diagram




    HF-8/4-K2G8000370Sleeve temperature sensor, NTC2K, 4m, PVC sensor cableAccessories
    WP-01G9990180Heat transfer paste, 2ml, -40..+150...°CAccessories
    HF-8/6-K2G8000368Sleeve temperature sensor, NTC2K, 6m, PVC sensor cableAccessories
    THFC1809515Protective sleeve for screed installation of sleeves/cable sensor, copper, inner diameter 7.7mmAccessories
    ZBOOA-010.185G8990010Valve actuator "Stella" 230V NC for the fully automatic hydraulic compensationAccessories

    Contact request


    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu