VOORL-215.009
Terminal strip, H/C changeover via external contact, max. 5 room thermostats and 20 valve actuators, IP20
This device was specially developed for fast, clear and convenient wiring of 230 VAC individual room temperature controllers with the associated valve actuators for permanent installation. The heating/cooling changeover takes place via a central contact. Heating controllers with changeover contact can be connected as controllers. Significant time and cost savings thanks to the convenient wiring using screwless spring terminals and the ingeniously quick and clean installation in the heating circuit distributor using the optional magnetic feet. A master-slave time zone can be created by using a clock controller. The time zone can also be switched over to the ECO function via an external switching contact at terminal U.
Art.-Nr.: DA490110
Technical data
Ambient temperature, lower value | -10 °C |
Ambient temperature, upper value | 50 °C |
Bearing temperature, lower value | -20 °C |
Bearing temperature, upper value | 70 °C |
Colour | Light grey |
Connection cross-section | 0,2-1,5mm²(rigid), 0,25-0,75mm²(flex) |
Electric connection | Spring push-lock terminals |
Housing material | Plastic ABS |
Maximum air humidity (non-condensing) | 95 % r.H |
Mounting / attachment | Wall mounting |
Protection class | II, following appropriate mounting |
RAL colour number (similar) | 7035 |
Surface properties | Matt |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.