ITR 79.600
Temperature controller for standard rail mounting, 2x 5…30…°C
Electronic temperature controller specifically for room temperature control using remote sensor. This device has two separate setpoint adjusters, which make it possible to control a room with two different temperatures by manual switching or depending on time (e.g. using timer). Switching between setpoints is performed via an external potential-free contact. The device has a sensor failure and sensor short circuit fuse. The sensor is not included in the delivery. All sensors with the number 2 can be used, e.g. KF-2. Hysteresis approx. 0.5K.
Art.-Nr.: D4780508
Technical data
| Actual temperature display | No |
| Ambient temperature, lower value | -10 °C |
| Ambient temperature, upper value | 40 °C |
| Assembly | Controller without sensor |
| Bearing temperature, lower value | -20 °C |
| Bearing temperature, upper value | 60 °C |
| Colour | Grey |
| Connection cross-section | 0,5 mm² – 2,5 mm² |
| Control range, lower value | 5 °C |
| Control range, upper value | 30 °C |
| Cooling control function | Yes |
| Depth | 62,5 mm |
| Display cooling | No |
| ECO function (reduction) | Yes |
| Electric connection | Screw terminals |
| Electronic control | Yes |
| External setting | Yes |
| Heating control function | Yes |
| Heating display | No |
| Height | 86 mm |
| Housing material | Plastic PC |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | S: 10 (2) A; O: 5 (1,5) A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Medium | Air, not aggressive |
| Minimum switching voltage | 5 V AC / 50 Hz |
| Mounting / attachment | On supporting rails (35 mm), EN 60715 |
| Number of control ranges | 2 |
| Number of outputs | 2 |
| Operating voltage | 230 V AC / 50 Hz |
| Operation | Rotary knob |
| Output signal | Switching |
| Potential free switching contact | Yes |
| Protection class | II, following appropriate mounting |
| RAL colour number (similar) | 7035 |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sensor element | NTC external |
| Sensor external | Yes |
| Sensor type | NTC 47K (sensor 2) |
| Surface properties | Matt |
| Switching contact | Two-way contact |
| Switching difference | 0.5 K |
| Switching difference, can be adjusted | No |
| Switching element | Relay |
| Switching power | 2300 W bzw. 1150 W |
| Type of protection | IP20 |
| Width | 36 mm |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 | STF-2 | SN080200 | Radiation temperature sensor, 2x NTC47K | Accessories |
 | AF-2 | G9040380 | External temperature sensor, NTC47K | Accessories |
 | PFC 47/6m | G9130180 | Radiation temperature sensor, pendulum, NTC47K, 6m | Accessories |
 | BTF2-C47-0000 | SA140014 | Room temperature sensor, NTC47K, surface-mounted super flat | Accessories |
 | JZ-13 | ZA990001 | Standard rail with drill holes for attaching switch cabinet controls, length 40 mm | Accessories |
 | ALF-2 | G9050160 | Contact temperature sensor, NTC47K | Accessories |
 | FUFC 47-0000 | SN090198 | Room temperature sensor, NTC47K, flush-mounted, cover 50x50mm, pure white gloss | Accessories |
 | KF-2 | G9031446 | Cable temperature sensor, NTC47K, 1.5m, PE sensor cable, -35...+100...°C | Accessories |
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
