Skip to main content

Room thermostat, flush-mounted, 230V AC, NC contact, night-time reduction, internal setting, cover 50x50mm, pure white, gloss


Room thermostat, flush-mounted, 230V AC, NC contact, night-time reduction, internal setting, cover 50x50mm, pure white, gloss

Electro-mechanical flush-mounted room thermostat for controlling and monitoring of temperatures in offices, residential properties and hotels. Can be used in nearly all switch ranges using intermediate frames. The controller has an internal setpoint adjustment. This makes it ideal for installation in administrative buildings, banks, schools, nurseries, museums and similar buildings where unauthorised people are to be prevented from adjusting the setpoint. Suitable for water-based heating systems. Thermal feedback is used to obtain a very accurate switching difference. The setting range can be adjusted using the range reducer located under the adjustment knob. Connecting the ECO terminal with 24 V AC/V DC (e.g. using clock controller or time switch clock) leads to an approx. 4K lower adjusted temperature. Simple electric connection without screws. New terminals for quick and easy installation. Simplified wiring thanks to colour-coded terminals. The modular principle saves time: Controller, frame and cover are mounted in a practical order. Small installation volume for quick and easy mounting in flush-mounted socket. Temperature control possible even without cover. Closed design. Optimum screw seat.
  • play pause
  • Art.-Nr.: UA090013

    Technical data

    Actual temperature displayNo
    Additional heating displayNo
    Additional heating switchNo
    Ambient temperature, lower value0 °C
    Ambient temperature, upper value30 °C
    AssemblyBasic device with cover
    Bearing temperature, lower value-20 °C
    Bearing temperature, upper value70 °C
    ColourPure white
    Connection cross-section1,0-2,5mm² (rigid), 0,75–1,5mm² (flex.)
    Control behaviour2-point
    Control range, lower value5 °C
    Control range, upper value30 °C
    Cooling control functionNo
    Depth41,8 mm
    DesignBerlin 3000
    ECO displayNo
    ECO function (reduction)Yes
    ECO input (reduction)230 V AC, 50 Hz
    ECO temperature reductionApprox. 4 K
    Electric connectionSpring push-lock terminals
    Electronic controlNo
    Energy efficiency classI
    External settingNo
    Heating / cooling switchNo
    Heating / off / cooling switchNo
    Heating control functionYes
    Heating displayNo
    Height71 mm
    Housing materialPlastic PA6, cover PC
    Internal settingYes
    Maximum air humidity (non-condensing)95 % r.H
    Maximum power consumption< 0.5W
    Maximum switching current10 (4) A
    Maximum switching voltage230 V AC, 50 Hz
    Mechanical range reductionNo
    MediumAir, not aggressive
    Minimum switching voltage230 V AC / 50 Hz
    Mounting / attachmentFlush mounting (deep socket recommended)
    NEMA type of protectionOther
    Number of control ranges1
    Number of outputs1
    Number of outputs, heating1
    On / Off switchNo
    Operating voltage230 V AC / 50 Hz
    OperationInternal setpoint adjuster
    Output signalSwitching (230 V AC, 50 Hz)
    Potential free switching contactNo
    Protection classII, following appropriate mounting
    Protective capNo
    RAL colour number (similar)9010
    Reduction / heating / external reduction switchNo
    Reduction switchNo
    Safety and EMCIn accordance with DIN EN 60730
    ScaleIndex number scale
    Sensor elementBimetal
    Sensor externalNo
    Surface propertiesGloss
    Switching contactNC contact
    Switching differenceApprox. 0.5 K (delta T max. 4 K/h)
    Switching difference, can be adjustedNo
    Switching elementBimetal contact
    Switching power2300 W
    Temperature controller versionRoom thermostat
    Test mark approvalCE
    Thermal feedbackYes
    Type of protectionIP30
    Type of wiringThree-/four-wire
    Width71 mm
    With explosion protectionNo
    Circuit diagram Circuit diagram


    Info sheet

    Assembly instructions


    ZBOOA-010.100H9100010Heating valve actuator, 230V AC, closed when de-energisedAccessories
    JZ-090.900VV000025alre frame "Berlin" for all flush-mounted devices with cover 50x50, pure white (RAL9010), glossAccessories
    ZBOOA-010.185G8990010Valve actuator "Stella" 230V NC for the fully automatic hydraulic compensationAccessories

    Contact request


    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu