Room thermostat, flush-mounted, 230V AC, NC contact, additional heating display/switch, alre frame, cover 50x50mm, pure white, gloss
Electro-mechanical flush-mounted room thermostat for controlling and monitoring of temperatures in offices, residential properties and hotels. Provides a perfect visual match in many switch ranges without any intermediate frames. Suitable for all types of heating. Additional heating can be switched on using a switch. A red light indicates when additional heating has been activated. The total current (heating + additional heating) must not exceed 10 (4) A. The total output (heating + additional heating) must not exceed 2300 W. Thermal feedback is used to obtain a very accurate switching difference. The setting range can be adjusted using the range reducer located under the adjustment knob.
Product inquiry
Art.-Nr.: UA010702
Technical data
| connection cross-section | 0,5 mm² bis 1,5 mm² |
| number of outputs | 2 |
| number of outputs, heating | 2 |
| number of outputs, cooling | 0 |
| number of control ranges | 1 |
| ECO display | No |
| heating display | No |
| actual temperature display | No |
| additional heating display | Yes |
| temperature controller version | room thermostat |
| output signal | switching (230 V AC, 50 Hz) |
| external setting | Yes |
| protective cap | No |
| operation | rotary knob and switches |
| operating voltage | 230 V AC / 50 Hz |
| width | 71mm |
| design | Berlin UP |
| display | No |
| ECO function (reduction) | No |
| electric connection | screw terminals |
| electronic control | No |
| energy efficiency class | I |
| with explosion protection | No |
| colour | reinweiß |
| RAL colour number (similar) | 9010 |
| sensor element | bimetal |
| height | 71mm |
| internal setting | No |
| bearing temperature, upper value | 70°C |
| bearing temperature, lower value | -20°C |
| maximum air humidity (non-condensing) | 95% r.H |
| housing material | plastic PC |
| maximum power consumption | < 0.5W |
| maximum switching voltage | 230 V AC, 50 Hz |
| maximum switching current | 10 (4) A |
| mechanical range reduction | Yes |
| medium | air, not aggressive |
| minimum switching voltage | 230 V AC / 50 Hz |
| mounting / attachment | flush mounting (deep socket recommended) |
| surface properties | gloss |
| test mark approval | CE |
| control range, upper value | 30°C |
| control range, lower value | 5°C |
| heating control function | Yes |
| cooling control function | No |
| control behaviour | 2-point |
| switching difference | approx. 0.5 K (delta T max. 4 K/h) |
| switching difference, can be adjusted | No |
| switching element | bimetal contact |
| reduction switch | No |
| reduction / heating / external reduction switch | No |
| On / Off switch | No |
| heating / cooling switch | No |
| heating / off / cooling switch | No |
| additional heating switch | Yes |
| switching contact | NC contact |
| potential free switching contact | No |
| switching power | 2300 W |
| type of protection | IP30 |
| protection class | II, following appropriate mounting |
| sensor external | No |
| Safety and EMC | in accordance with DIN EN 60730 |
| scale | numerical scale *…6 |
| thermal feedback | Yes |
| depth | 42,5mm |
| ambient temperature, upper value | 30°C |
| ambient temperature, lower value | 0°C |
| assembly | complete device |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 | ZBOOA-010.100 | H9100010 | Heating valve actuator, 230V AC, closed when de-energised | Accessories |
 | VOOPL-216.176 | DA480510 | Terminal strip, max. 6 room thermostats and 12 valve actuators, IP20 | Accessories |
 | VOOPL-318.178 | DA480520 | Terminal strip, max. 8 room thermostats and 16 valve actuators, IP20 | Accessories |
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
