FTR 101.086#21
Room thermostat, flush-mounted, 230V AC, NC contact, 3000W, alre frame, cover 50x50mm, pure white, gloss
Electro-mechanical flush-mounted room thermostat for controlling and monitoring of temperatures in offices, residential properties and hotels. Especially suitable for more powerful electric heaters. Thermal feedback is used to obtain a very accurate switching difference (do not connect N terminal if heating power is 1500W or above). The setting range can be adjusted using the range reducer located under the adjustment knob.
Art.-Nr.: UN010607
Technical data
| Actual temperature display | No |
| Additional heating display | No |
| Additional heating switch | No |
| Ambient temperature, lower value | 0 °C |
| Ambient temperature, upper value | 30 °C |
| Assembly | Complete device |
| Bearing temperature, lower value | -20 °C |
| Bearing temperature, upper value | 70 °C |
| Colour | Pure white |
| Connection cross-section | 0,5 mm² bis 1,5 mm² |
| Control behaviour | 2-point |
| Control range, lower value | 5 °C |
| Control range, upper value | 30 °C |
| Cooling control function | No |
| Depth | 42,5 mm |
| Design | Berlin UP |
| Display | No |
| ECO display | No |
| ECO function (reduction) | No |
| Electric connection | Screw terminals |
| Electronic control | No |
| Energy efficiency class | I |
| External setting | Yes |
| Heating / cooling switch | No |
| Heating / off / cooling switch | No |
| Heating control function | Yes |
| Heating display | No |
| Height | 81 mm |
| Housing material | Plastic PC |
| Internal setting | No |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum power consumption | < 0.5W |
| Maximum switching current | 13 (4) A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Mechanical range reduction | Yes |
| Medium | Air, not aggressive |
| Minimum switching voltage | 230 V AC / 50 Hz |
| Mounting / attachment | Flush mounting (deep socket recommended) |
| Number of control ranges | 1 |
| Number of outputs | 1 |
| Number of outputs, heating | 1 |
| On / Off switch | No |
| Operating voltage | 230 V AC / 50 Hz |
| Operation | Rotary knob |
| Output signal | Switching (230 V AC, 50 Hz) |
| Potential free switching contact | No |
| Protection class | II, following appropriate mounting |
| Protective cap | No |
| RAL colour number (similar) | 9010 |
| Reduction / heating / external reduction switch | No |
| Reduction switch | No |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Index number scale *…6 |
| Sensor element | Bimetal |
| Sensor external | Yes |
| Surface properties | Gloss |
| Switching contact | NC contact |
| Switching difference | Approx. 0.5 K (delta T max. 4 K/h) |
| Switching difference, can be adjusted | No |
| Switching element | Bimetal contact |
| Switching power | 3000 W |
| Temperature controller version | Room thermostat |
| Test mark approval | CE |
| Thermal feedback | Yes |
| Type of protection | IP30 |
| Width | 85 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 | ZBOOA-010.100 | H9100010 | Heating valve actuator, 230V AC, closed when de-energised | Accessories |
 | VOOPL-216.176 | DA480510 | Terminal strip, max. 6 room thermostats and 12 valve actuators, IP20 | Accessories |
 | VOOPL-318.178 | DA480520 | Terminal strip, max. 8 room thermostats and 16 valve actuators, IP20 | Accessories |
 | ZBOOA-010.185 | G8990010 | Valve actuator "Stella" 230V NC for the fully automatic hydraulic compensation | Accessories |
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
