HTRRUt210.A00#55
Room temperature controller with luminous ring scale, flush-mounted, cover 55x55mm, pure white, glossy
This room temperature controller was specially developed for controlling or monitoring temperatures in offices, living rooms and hotels and is suitable for the direct connection of valve drives for hot water heating systems.
The device is equipped with LEDs arranged in a circle
show the current room temperature and allows the user to set the desired temperature via simple up/down touch sensors.
The device is equipped with LEDs arranged in a circle
show the current room temperature and allows the user to set the desired temperature via simple up/down touch sensors.
Art.-Nr.: UA120000
Technical data
| Ambient temperature, lower value | 0 °C |
| Ambient temperature, upper value | 40 °C |
| Assembly | Basic device with cover |
| Bearing temperature, lower value | -20 °C |
| Bearing temperature, upper value | 70 °C |
| Colour | Pure white |
| Connection cross-section | 0,33 mm² bis 1,5 mm² |
| Control behaviour | 2-point |
| Control range, lower value | 17 °C |
| Control range, upper value | 26 °C |
| Cooling control function | No |
| Depth | 42 mm |
| Design | Berlin UP |
| Electric connection | Screwed plug-in terminals |
| Electronic control | Yes |
| Energy efficiency class | IV |
| External setting | Yes |
| Heating control function | Yes |
| Height | 71 mm |
| Housing material | Plastic PC |
| Internal setting | No |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | 1 A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Medium | Air, not aggressive |
| Minimum switching voltage | 230 V AC / 50 Hz |
| Mounting / attachment | Flush mounting (deep socket recommended) |
| Number of control ranges | 1 |
| Number of outputs | 1 |
| Number of outputs, heating | 1 |
| Operating voltage | 230 V AC / 50 Hz |
| Operation | Touch-sensitive buttons |
| Output signal | Switching (230 V AC, 50 Hz) |
| Potential free switching contact | No |
| Protection class | II, following appropriate mounting |
| RAL colour number (similar) | 9010 |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Light ring scale |
| Sensor element | NTC internal |
| Sensor external | No |
| Surface properties | Gloss |
| Switching contact | Normally open contact |
| Switching difference | 0.5 K |
| Switching difference, can be adjusted | No |
| Switching element | Relay |
| Switching power | 250 W |
| Temperature controller version | Room thermostat |
| Test mark approval | CE |
| Type of protection | IP30 |
| Width | 71 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 | JZ-090.100 | VV000048 | alre frame "Berlin" for all flush-mounted devices with cover 55x55, pure white (RAL9010), gloss | Accessories |
 | ZBOOA-010.185 | G8990010 | Valve actuator "Stella" 230V NC for the fully automatic hydraulic compensation | Accessories |
 | ZBOOA-010.100 | H9100010 | Heating valve actuator, 230V AC, closed when de-energised | Accessories |
 | VOOPL-216.176 | DA480510 | Terminal strip, max. 6 room thermostats and 12 valve actuators, IP20 | Accessories |
 | VOOPL-318.178 | DA480520 | Terminal strip, max. 8 room thermostats and 16 valve actuators, IP20 | Accessories |
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
