RFHSB-060.011
Room hygrostat, surface-mounted, 24V AC to 230V AC, 35…85% r.H., two-way contact, internal setting
The room hygrostat is used to monitor and control relative humidity, e.g. in business premises, apartments, conservatories, bathrooms, swimming pools, computer rooms and other spaces with a clean, non-aggressive environment. Relative humidity acting on a measuring strip activates a potential-free switch contact. Its internal setpoint setting makes it especially suitable for public authorities, schools and similar public buildings.
Art.-Nr.: MA020203
Technical data
| Ambient temperature, lower value | 0 °C |
| Ambient temperature, upper value | 60 °C |
| Assembly | Complete device |
| Bearing temperature, lower value | -20 °C |
| Bearing temperature, upper value | 70 °C |
| Can be read off | No |
| Colour | Pure white |
| Connection cross-section | 0,5 mm² – 2,5 mm² |
| Contact interlocking | No |
| Cooling control function | No |
| Degree of contamination | 2 |
| Depth | 25,5 mm |
| Design | Berlin 2000 |
| Digital display | No |
| Display | No |
| Electric connection | Screw terminals |
| External setting | No |
| Heating control function | No |
| Height | 83,4 mm |
| Housing material | Plastic ABS |
| Humidify / dehumidify control function | Yes |
| Internal setting | Yes |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | E: 5 (0,2) A ; B: 2 (0,2) A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Mechanical range reduction | No |
| Medium | Air, not aggressive |
| Minimum switching current | 100 mA |
| Minimum switching voltage | 24 V AC / 50 Hz |
| Mounting / attachment | Surface mounting |
| NEMA type of protection | Other |
| Number of outputs | 2 |
| On / Off switch | No |
| Operating voltage | None |
| Operation | Internal setpoint adjuster |
| Output signal | Switching (230 V AC / 24 V AC, 50 Hz) |
| Potential free switching contact | No |
| Protection class | II, following appropriate mounting |
| RAL colour number (similar) | 9010 |
| Safety and EMC | In accordance with DIN EN 60730 |
| Sealable | No |
| Sensor element | Plastic fibres |
| Setting range, rel. air humidity lower value | 35 % |
| Setting range, rel. air humidity upper value | 85 % |
| Surface properties | Matt |
| Switching contact | Two-way contact |
| Switching difference | Approx. 7% r.H. |
| Switching difference, can be adjusted | No |
| Switching element | Microswitch |
| Switching power | 1150 W bzw. 460 W |
| Type of protection | IP30 |
| Width | 78,3 mm |
| With explosion protection | No |
| With thermostat | No |
| Circuit diagram | |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
