Skip to main content

Room hygrostat, flush-mounted, 24V AC to 230V AC, 35…85% r.H., two-way contact, alre frame, cover 50x50mm, pure white, gloss

FHY 101.060#21

Room hygrostat, flush-mounted, 24V AC to 230V AC, 35…85% r.H., two-way contact, alre frame, cover 50x50mm, pure white, gloss

The room hygrostat is designed for monitoring and controlling relative humidity, e.g. in business premises, apartments, conservatories, bathrooms, swimming pools, computer rooms and other spaces with a clean, non-aggressive environment. Relative humidity acting on a measuring strip activates a potential-free switch contact. The setpoint is adjusted using the adjustment knob located on the front. The setting range can be restricted.
  • Art.-Nr.: UA020003

    Technical data

    Ambient temperature, lower value0 °C
    Ambient temperature, upper value50 °C
    AssemblyComplete device
    Bearing temperature, lower value-20 °C
    Bearing temperature, upper value60 °C
    Can be read offNo
    ColourPure white
    Connection cross-section0,5 mm² – 2,5 mm²
    Contact interlockingNo
    Cooling control functionNo
    Degree of contamination2
    Depth42,5 mm
    DesignBerlin UP
    Digital displayNo
    Electric connectionScrew terminals
    External settingYes
    Heating control functionNo
    Height85 mm
    Housing materialPlastic PC
    Humidify / dehumidify control functionYes
    Internal settingNo
    Maximum air humidity (non-condensing)95 % r.H
    Maximum switching currentE: 5 (0,2) A ; B: 2 (0,2) A
    Maximum switching voltage230 V AC, 50 Hz
    Mechanical range reductionYes
    MediumAir, not aggressive
    Minimum switching current100 mA
    Minimum switching voltage24 V AC / 50 Hz
    Mounting / attachmentFlush mounting (deep socket recommended)
    NEMA type of protectionOther
    Number of outputs2
    On / Off switchNo
    Operating voltageNone
    OperationRotary knob
    Output signalSwitching (230 V AC / 24 V AC, 50 Hz)
    Potential free switching contactNo
    Protection classII, following appropriate mounting
    RAL colour number (similar)9010
    Safety and EMCIn accordance with DIN EN 60730
    Sensor elementPlastic fibres
    Setting range, rel. air humidity lower value35 %
    Setting range, rel. air humidity upper value85 %
    Surface propertiesGloss
    Switching contactTwo-way contact
    Switching differenceApprox. 5% r.H.
    Switching difference, can be adjustedNo
    Switching elementMicroswitch
    Switching power1150 W bzw. 460 W
    Type of protectionIP30
    Width81 mm
    With explosion protectionNo
    With thermostatNo


    Assembly instructions



    Contact request


    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu