Skip to main content

JSW flow monitor for 1/2″

JSW-1/2

JSW flow monitor for 1/2″

For monitoring small and medium quantities of non-aggressive liquid in pipes with diameter of 1/2″. The device does not require any supply voltage. Installation: Vertical in a horizontal pipe. Damping zone at least 5-times pipe diameter in front of and behind the paddle. Mounting/attachment: Union nut G 3/8″ on soldering socket (for soldering into a standard copper T-piece
with outlet 1/2″) or T-pieceNot certified for drinking water.
  • Art.-Nr.: H530944

    Technical data

    Ambient temperature, lower value-20 °C
    Ambient temperature, upper value70 °C
    Bearing temperature, lower value-20 °C
    Bearing temperature, upper value70 °C
    Carrier materialMs nickel-plated
    ColourBlack
    Degree of contamination2
    Depth35 mm
    Electric connectionScrew terminals
    Function type (systems engineering)Monitor
    Height66 mm
    Housing materialPlastic
    Internal settingYes
    Max.pressure2500000 Pa
    Maximum air humidity (non-condensing)95 % r.H
    Maximum switching current5 A
    Maximum switching voltage230 V AC, 50 Hz
    MediumFluid, not aggressive
    Medium temperature110 °C
    Minimum switching current100 mA
    Minimum switching voltage24 V AC / 50 Hz
    Mounting / attachmentPipe mounting
    Number of control ranges1
    Operating voltageNone
    Output signalSwitching
    Paddle materialStainless steel
    Pipe dimension1/2″
    Potential free switching contactYes
    Protection classII, following appropriate mounting
    Safety and EMCIn accordance with DIN EN 60730
    Sensor elementFlow paddle
    Surface propertiesMatt
    Switching contactTwo-way contact
    Switching elementMicroswitch
    Switching power1150 W
    Type of protectionIP65
    Width30 mm
    With explosion protectionNo
    Circuit diagram Circuit diagram

    Downloads

    Instructions

    Datasheet

    PhotoTypeArticlenumberFeaturesKind
    T-Stück 1"H530953T-piece 1" for JSW-1, nickel-plated brassAccessories
    T-Stück 1/2"H530957T-piece 1/2" for JSW-1/2, nickel-plated brassAccessories
    T-Stück 3/4"H530951T-piece 3/4" for JSW-3/4, nickel-plated brassAccessories
     

    Contact request

      This form is currently undergoing maintenance. Please try again later.

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu