JSF-4 E
JSF flow monitor for 3/4″
This flow monitor was specially developed for monitoring the flow of liquid media. The monitor is typically used in machine and apparatus construction, for monitoring oil, cooling, and lubrication circuits, or as low-water protection in sprinkler systems, heating systems, chillers, and heat pumps. The unit is installed vertically in a horizontal pipe. The calming distance must be at least 5 times the pipe diameter upstream and downstream of the paddle. The maximum flow can be considerably higher than the max. setting the value of the monitor. Not tested for drinking water.
Attached T-piece made from grey cast iron.
Art.-Nr.: JA060600
Technical data
| Ambient temperature, lower value | -40 °C |
| Ambient temperature, upper value | 85 °C |
| Assembly | Flow monitor, T-piece, paddle set |
| Bearing temperature, lower value | -40 °C |
| Bearing temperature, upper value | 85 °C |
| Carrier material | Ms nickel-plated |
| Colour | Grey |
| Degree of contamination | 2 |
| Depth | 128 mm |
| Electric connection | Screw terminals |
| Function type (systems engineering) | Monitor |
| Height | 71 mm |
| Housing material | Plastic |
| Internal setting | Yes |
| Max.pressure | 500000 Pa |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | 15 (8) A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Medium | Fluid, not aggressive |
| Medium temperature | 120 °C |
| Minimum switching current | 150 mA |
| Minimum switching voltage | 24 V AC / 50 Hz |
| Mounting / attachment | Pipe mounting |
| Number of control ranges | 1 |
| Operating voltage | None |
| Output signal | Switching |
| Paddle material | Stainless steel |
| Pipe dimension | 3/4″ |
| Potential free switching contact | Yes |
| Protection class | I |
| RAL colour number (similar) | 7016/7035 |
| Safety and EMC | In accordance with DIN EN 60730 |
| Sensor element | Flow paddle |
| Surface properties | Matt |
| Switching contact | Two-way contact |
| Switching element | Microswitch |
| Switching power | 3450 W |
| Test mark approval | Type-tested by TÜV |
| Type of protection | IP65 |
| Width | 165 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 | JZ-09 | E6140170 | Replacement paddle (4 pcs), from 1"... 8" for JSF flow monitor | Spare part |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
