Skip to main content

Industrial built-in duct temperature sensor, PT1000, installation length 165mm

IKF1P1000/150

Industrial built-in duct temperature sensor, PT1000, installation length 165mm

The IKF1 industrial installation duct sensor is used to measure the temperatures of liquids and gases in pipelines, air ducts or containers in machines, apparatus, and plant construction. For use in air ducts, the mounting flange (MF) is required. For use in liquids, immersion sleeves made of nickel-plated brass (THMs) must be used. For aggressive media, immersion sleeves made of stainless steel V4A (THV) are recommended. Immersion sleeves or mounting flange are not included in the scope of delivery and must be ordered separately as accessories.
  • Art.-Nr.: G9150280

    Technical data

    Active temperature measurementNo
    Ambient temperature, lower value-30 °C
    Ambient temperature, upper value100 °C
    Bearing temperature, lower value-30 °C
    Bearing temperature, upper value100 °C
    Connection cross-section0,14 mm² bis 2,5 mm²
    Cover fasteningScrew fastening
    Diameter sensor element6 mm
    Electric connectionScrew terminals
    Housing materialAluminum
    Max. sensor temperature150 °C
    Maximum air humidity (non-condensing)95 % r.H
    MediumGas / liquid substances (not aggressive)
    Mounting / attachmentImmersion sleeves or mounting flange
    Passive temperature measurementYes
    Plug-in length165 mm
    Protection classIII
    Safety and EMCIn accordance with DIN EN 60730
    Sensor elementPt1000
    Sensor element inside the housingNo
    Sensor element outside the housingYes
    Suitable for fluidsYes
    Suitable for gasesYes
    Surface propertiesMatt
    Temperature measuring range lower value-30 °C
    Temperature measuring range upper value150 °C
    Type of protectionIP43
    Version of sensorTemperature sensor for gases/liquids
    With explosion protectionNo
    With housingYes
    With mounting materialNo
    With supply lineNo
    Circuit diagram Circuit diagram

    Downloads

    Instructions

    Datasheet

    PhotoTypeArticlenumberFeaturesKind
    THV/150G9990080Immersion sleeve, 150mm, V4A 1.4571, inner x outer diameter 6.3x9mmAccessories
    MFG9990160Mounting flange for built-in duct sensor EKF/IKF/GFLAccessories
    THMs/150G9990030Immersion sleeve, 150mm, nickel-plated brass with insertion, inner x outer diameter 6.5x8mmAccessories
     

    Contact request

      This form is currently undergoing maintenance. Please try again later.

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu