Skip to main content

Hygrostat, duct/wall mounting, internal setting

HI-1F

Hygrostat, duct/wall mounting, internal setting

Used in ventilation and air-conditioning ducts, climate chambers and dehumidification devices for controlling and / or monitoring air humidity in industry and agriculture. Not suitable for aggressive gases. Max. air speed 8 m / s, with sensor protection S-HI 15 m / s. Due to internal setting, especially suited to installations where unauthorised people are to be prevented from adjusting the setpoint.
  • Art.-Nr.: JA010200

    Technical data

    Ambient temperature, lower value0 °C
    Ambient temperature, upper value60 °C
    Average power consumption0 W
    Bearing temperature, lower value-20 °C
    Bearing temperature, upper value60 °C
    ColourLight grey
    Depth67,5 mm
    Electric connectionScrew terminals
    External settingNo
    Function type (systems engineering)Monitor
    Height130 mm
    Housing materialPlastic ABS
    Humidify / dehumidify control functionYes
    Internal settingYes
    Maximum air humidity (non-condensing)95 % r.H
    Maximum switching current15 (8) A
    Maximum switching voltage230 V AC, 50 Hz
    Mechanical range reductionNo
    MediumAir, not aggressive
    Minimum switching current150 mA at 125 V AC
    Minimum switching voltage24 V AC / 50 Hz
    Mounting / attachmentMounting on air duct or wall mounting
    Number of control ranges1
    Number of outputs2
    Number of switching stages1
    Operating voltageNone
    OperationInternal setpoint adjuster
    Output signalHumidify or dehumidify, switching
    Potential free switching contactYes
    Protection classII, following appropriate mounting
    RAL colour number (similar)7016/7035
    Safety and EMCIn accordance with DIN EN 60730
    Sensor elementPlastic fibres
    Setting range, rel. air humidity lower value30 %
    Setting range, rel. air humidity upper value100 %
    Surface propertiesMatt
    Switching contactTwo-way contact
    Switching differenceApprox. 5% r.H.
    Switching difference, can be adjustedNo
    Switching elementMicroswitch
    Switching power3450 W
    Type of protectionIP65 housing side
    Width71 mm
    With explosion protectionNo
    Circuit diagram Circuit diagram

    Downloads

    Instructions

    Datasheet

    PhotoTypeArticlenumberFeaturesKind
    FS-HIH530975Sensor protection for Hygrostat HI-1 / HI1F / HI2Accessories
    JZ-20-1E6130144Wall bracket incl. attachment material for duct hygrostat HI-1 / HI-1F / HI-2Accessories
    FS2-HIH531011PTFE filter for Hygrostat HI-1 / HI1F / HI2Accessories
     

    Contact request

      This form is currently undergoing maintenance. Please try again later.

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu