FETR 101.700#07
Floor thermostat with remote sensor, flush-mounted, 10-60°C, cover 50x50mm, pure white, glossy, indoor setting
This electronic two-point controller was specially developed for controlling electric (max. 3680 W) or hot water heaters/additional heaters for floors and other surface temperature control systems. The FETR 101.700 has an internal setpoint adjustment. This makes it particularly suitable for installation in public authorities, banks, schools, kindergartens, museums and similar buildings where setpoint adjustment by unauthorized persons is to be prevented. Remote sensor HF-8/4-K2 (4 m) included in the scope of delivery. The heating is switched off in the event of a sensor break or short circuit. The temperature setback input can be used to set the temperature to approx. 5 K lower (night setback).
Art.-Nr.: UN030000
Technical data
| Actual temperature display | No |
| Additional heating switch | No |
| Ambient temperature | 0 … 40 °C |
| Assembly | basic device with cover |
| Bearing temperature | –20 … 70 °C |
| Colour | pure white |
| Control behaviour | 2-point |
| Control range | 10 … 60 °C |
| Cooling control function | No |
| Design | Berlin UP |
| Dimensions (W x H x D) | 71 mm x 71 mm x 42,5 mm |
| Display | No |
| ECO function (reduction) | Yes |
| ECO input (reduction) | 230 VAC, 50 Hz |
| ECO temperature reduction | approx. 5 K |
| Electric connection | screw terminals |
| Electronic control | Yes |
| Energy efficiency class | I |
| External setting | No |
| Heating control function | Yes |
| Housing material | plastic PC |
| Internal setting | Yes |
| Max. air humidity (non-condensing) | 95 % r.H. |
| Max. switching current | 16 (2) A |
| Max. switching voltage | 230 VAC, 50 Hz |
| Mechanical range reduction | No |
| Medium | Air |
| Min. switching voltage | 230 VAC, 50 Hz |
| Montage/Befestigung | flush mounting (deep socket recommended) |
| Number of control ranges | 1 |
| Number of outputs | 1 |
| Number of outputs, heating | 1 |
| Operating voltage | 230 VAC, 50 Hz |
| Operation | internal setpoint adjuster |
| Output signal | switching |
| Potential free switching contact | No |
| Protection class | II, following appropriate mounting |
| RAL colour number (similar) | 9010 |
| Safety and EMC | in accordance with DIN EN 60730 |
| Scale | Index number scale 1…6 |
| Schalter Ein/Aus | No |
| Schalter Heizen/Kühlen | No |
| Sensor element | NTC external |
| Sensor external | Yes |
| Surface finish | gloss |
| Switch/lamp night-time reduction | No |
| Switching contact | normally open contact |
| Switching difference, can be adjusted | No |
| Switching differential | 0,5 … 1 K |
| Switching element | relay |
| Switching power | 3680 W |
| Temperature controller version | underfloor temperature controller |
| Type of wiring | other |
| With receiver | No |
| Photo | Type | Articlenumber | Features | Kind |
|---|
Kontaktanfrage
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
