Skip to main content

Built-in duct temperature sensor, PT100, installation length, 165mm

EKFP 100/150

Built-in duct temperature sensor, PT100, installation length, 165mm

The EKF built-in duct sensors are used to measure temperatures in liquids and gases in pipelines, air ducts, or containers. For use in air ducts, the mounting flange (MF) is required. For use in liquids, nickel-plated brass immersion sleeves (THMs) must be used. For aggressive media, immersion sleeves made of stainless steel V4A (THV) are recommended. Immersion sleeves or mounting flange are not included in the scope of delivery and must be ordered separately as accessories.
  • Art.-Nr.: G9140270

    Technical data

    Active temperature measurementNo
    Ambient temperature, lower value-30 °C
    Ambient temperature, upper value70 °C
    Bearing temperature, lower value-30 °C
    Bearing temperature, upper value70 °C
    ColourPure white
    Connection cross-section0,14 mm² bis 2,5 mm²
    Cover fasteningBayonet fastening
    Electric connectionScrew terminals
    Housing materialPlastic PA (30 % GF reinforced)
    Length of sensor150 mm
    Maximum air humidity (non-condensing)95 % r.H
    Mounting / attachmentIn imm. sleeve, prot. coil, on tube, etc
    Passive temperature measurementYes
    Plug-in length165 mm
    Protection classIII
    RAL colour number (similar)9010
    Safety and EMCIn accordance with DIN EN 60730
    Sensor elementPTC internal
    Sensor element inside the housingNo
    Sensor element outside the housingYes
    Sensor typePT-100
    Suitable for duct mountingYes
    Suitable for fluidsYes
    Suitable for gasesYes
    Suitable for pipe mountingYes
    Surface propertiesGloss
    Temperature measuring range lower value-30 °C
    Temperature measuring range upper value150 °C
    Version of sensorTemperature sensor for gases/liquids
    With explosion protectionNo
    With housingYes
    With supply lineNo
    Circuit diagram Circuit diagram

    Downloads

    Assembly instructions

    Datasheet

    PhotoTypeArticlenumberFeaturesKind
    THV/150G9990080Immersion sleeve, 150mm, V4A 1.4571, inner x outer diameter 6.3x9mmAccessories
    MFG9990160Mounting flange for built-in duct sensor EKF/IKF/GFLAccessories
    THMs/150G9990030Immersion sleeve, 150mm, nickel-plated brass with insertion, inner x outer diameter 6.5x8mmAccessories
     

    Contact request

      This form is currently undergoing maintenance. Please try again later.

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu