JSL-1E
Wind vane relay, 2 m/s…9.2 m/s, hysteresis approx. 1 m/s, internal setting
Wind vane relay for monitoring air flows in ducts, in supply and exhaust air units of fans or electric heating registers. The wind vane relay is factory-set to the minimum switching points. The switch-on/switch-off values can be increased by turning the internal screw clockwise. It is installed in a vertical paddle position from above in a horizontal pipe/duct. The setting range is 2 m/s … 9.2 m/s and the hysteresis is approx. 1 m/s.
Art.-Nr.: JA070100
Technical Data
| Ambient temperature | −40 … 80 °C |
| Assembly | Controller with sealing plate |
| Bearing temperature | –40 … 80 °C |
| Colour | grey |
| Degree of contamination | 2 |
| Dimensions (W x H x D) | 71 mm x 130 mm x 67 mm |
| Electric connection | screw terminals |
| Function type (systems engineering) | monitor |
| Housing material | plastic |
| Internal setting | Yes |
| Max. air humidity (non-condensing) | 95 % r.H. |
| Max. Sensor temperature | 85 °C |
| Max. switch-off value | 8 m/s |
| Max. switch-on value | 9.2 m/s |
| Max. switching current | 15 (8) A |
| Max. switching voltage | 230 VAC, 50 Hz |
| Medium | Gas |
| Min. switch-off value | 1 m/s |
| Min. switch-on value | 2 m/s |
| Min. switching current | 150 mA |
| Min. switching voltage | 24 VAC, 50 Hz |
| Mounting/attachment | mounting on air duct |
| Number of control ranges | 1 |
| Output signal | switching |
| Paddle material | stainless steel V2A (1.4301) |
| Potential free switching contact | Yes |
| Protection class | I |
| RAL colour number (similar) | 7035 |
| Safety and EMC | in accordance with DIN EN 60730 |
| Sensor element | wind indicator |
| Surface finish | matt |
| Switching contact | two-way contact |
| Switching element | microswitch |
| Switching power | 3450 W |
| Photo | Type | Articlenumber | Features | Kind |
|---|
Kontaktanfrage
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
