You are here: Industrial technology / Capillary, wet room and frost protection thermostats, control, cabinet controllers / Universal capillary thermostats (boiler thermostat, ventilation thermostat or contact thermostat)

RTKSA-001.100

Universal capillary thermostat, 0…50…°C, hysteresis 1.3K, TW, internal setting

This series of devices has been specially developed for use in heating technology in boiler systems or storage tanks, district heating transfer stations and heat transfer systems, in ventilation technology as supply air monitors or as limiters of electric heating registers as well as for controlling and monitoring temperatures on pipes and tanks. Immersion sleeves, protective coils, and fixing sets are not included in the scope of delivery. The JZ-29 fixing set must be used in conjunction with immersion sleeves or protection coils. When used as a pipe-mounted controller, the JZ-31 fixing set must be used.

Information sheet

Assembly instruction

Art.-Nr.: KA000100

Technical data

Ambient temperature, upper value	80 °C
Bearing temperature, lower value	-30 °C
Bearing temperature, upper value	80 °C
Capillary length	2 m
Colour	Anthr. grey (RAL7016), frontp. transp.
Contact interlocking	No
Control range, lower value	0 °C
Control range, upper value	50 °C
Cooling control function	Yes
Depth	57,5 mm
Device version	Surface-mounted unit
Diameter sensor element	6 mm
Electric connection	Push-in terminal
Electronic control	No
External reset	No
External setting	No
Function type (systems engineering)	TW
Heating control function	Yes
Height	146,8 mm
Internal setting	Yes
Length of sensor	175 mm
Max. sensor temperature	57 °C
Maximum air humidity (non-condensing)	95 % r.H
Maximum switching current	O: 16 (2,5) A; S: 6,3 (2,5) A, 0,25 ADC
Maximum switching voltage	230 V AC 50 / 60 Hz, 230 V DC
Minimum switching current	At 24 V (AC/DC) min. 100 mA
Minimum switching voltage	24 V AC / 50 Hz, 24 V DC
Mounting / attachment	In imm. sleeve, prot. coil, on tube, etc
Number of control ranges	1
Number of outputs	2
Operating voltage	None
Operation	Internal setpoint adjuster
Output signal	Switching
Potential free switching contact	Yes
Protection class	I
Safety and EMC	In accordance with DIN EN 60730
Scale	Degree Celsius
Sensor element	Capillary tube
Sensor material	Cu
Switching contact	Two-way contact
Switching difference	1.3 K
Switching difference, can be adjusted	No
Switching element	Microswitch
Type of protection	IP40
Width	53 mm
With explosion protection	No
Circuit diagram

Downloads

Info sheet

Assembly instructions

Datasheet

Type	Articlenumber	Features	Kind
THK-2-120	KA969902	Immersion sleeve, 120mm, nickel-plated brass, inner x outer diameter 7.5x10mm	Accessories
JZ-29	KA999901	Fastening set for RTKSA THK/NTHK/SWK single controller	Accessories
THK-2-280	KA969904	Immersion sleeve, 280mm, nickel-plated brass, inner x outer diameter 7.5x10mm	Accessories
SWK-2-100	KA989901	Protective coil, 100mm, nickel-plated steel, inner x outer diameter 10.5x17mm	Accessories
NTHK-2-200	KA969908	Immersion sleeve, 200mm, V4A (1.4571), inner x outer diameter 7.5x10mm	Accessories
JZ-31	KA999903	Fastening set for RTKSA tube mounting for contact controller	Accessories
SWK-2-200	KA989903	Protective coil, 200mm, nickel-plated steel, inner x outer diameter 10.5x17mm	Accessories
NTHK-2-100	KA969906	Immersion sleeve, 100mm, V4A (1.4571), inner x outer diameter 7.5x10mm	Accessories
THK-2-200	KA969903	Immersion sleeve, 200mm, nickel-plated brass, inner x outer diameter 7.5x10mm	Accessories
THK-2-100	KA969901	Immersion sleeve, 100mm, nickel-plated brass, inner x outer diameter 7.5x10mm	Accessories
THK-2-600	KA969905	Immersion sleeve, 600mm, nickel-plated brass, inner x outer diameter 7.5x10mm	Accessories
NTHK-2-280	KA969909	Immersion sleeve, 280mm, V4A (1.4571), inner x outer diameter 7.5x10mm	Accessories
NTHK-2-120	KA969907	Immersion sleeve, 120mm, V4A (1.4571), inner x outer diameter 7.5x10mm	Accessories
JZ-33	KA999904	Sealing set for universal capillary thermostats RTKSA-xxx.xxx	Accessories