Skip to main content

Universal capillary double thermostat, TW 0…120°C, TB 20…150°C, hysteresis TW=3K TB=-10…-15K

You are here: System technology / Capillary, damp room and frost protection thermostats, switch cabinet controllers / Universal capillary thermostat (boiler thermostat, ventilation thermostat or start-up thermostat)

RTKSA-013.210

Universal capillary double thermostat, TW 0…120°C, TB 20…150°C, hysteresis TW=3K TB=-10…-15K

This series of devices has been specially developed for use in heating technology in boiler systems or storage tanks, district heating transfer stations and heat transfer systems, in ventilation technology as supply air monitoring or as limiters for electric heating registers. Thermowells/protective coils are not included in the scope of delivery. The JZ-30 accessory must be used in conjunction with thermowells or protective coils. The control range / hysteresis is 0…120 °C / 3 K for the temperature monitor and 20…150 °C / -10…-15 K for the temperature limiter.
    • Art.-Nr.: KA001200

    Technical Data

    Bearing temperature –30 … 90 °C
    Capillary length 2 m
    Colour anthracite
    Contact interlocking Yes
    Control range 0 … 120 °C
    Cooling control function Yes
    Device version surface-mounted unit
    Diameter sensor element 6 mm
    Dimensions (W x H x D) 106 mm x 146,8 mm x 62,9 mm
    Electric connection Push-in clamp
    Electronic control No
    External reset Yes
    Function type (systems engineering) TW/TB
    Heating control function Yes
    Internal setting Yes
    Max. air humidity (non-condensing) 95 % r.H.
    Max. Sensor temperature 138 °C
    Max. switching current 16 (2,5) A, 0,25 A, 2 (0,4) A, 0,25 A
    Max. switching voltage 230 VAC, 50/60 Hz / 230 VDC
    Min. switching current at 24 V (AC/DC) min. 100 mA
    Min. switching voltage 24 VAC, 50 Hz / 24 VDC
    Mounting/attachment in imm. sleeve, prot. coil, on tube, etc
    Number of control ranges 2
    Number of outputs 4
    Operation internal setpoint adjuster, reset button
    Output signal switching
    Potential free switching contact Yes
    Protection class I
    Safety and EMC in accordance with DIN EN 60730
    Scale Degree Celsius
    Sensor element capillary tube
    Sensor material Cu
    Switching contact 2 two-way contacts
    Switching difference, can be adjusted No
    Switching element microswitch
    With explosion protection No

    Downloads

    Assembly instruction

    Sales brochure

    Datasheet

    Photo Type Articlenumber Features Kind
         

    Kontaktanfrage

       
       

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Send contact request