
VOORL-215.009
Terminal strip, H/K changeover via external contact, max. 5 room thermostats and 20 valve actuators, IP20
This device was specially developed for the quick, clear and convenient wiring of 230 VAC individual room temperature controllers with the associated valve actuators for fixed installation. The heating/cooling switchover takes place via a central contact. Heating controllers with changeover contact can be connected as controllers. High time and cost savings thanks to convenient wiring using screwless spring terminals and ingeniously quick and clean installation in the heating circuit manifold using the optional magnetic feet. A master-slave time zone can be created by using a clock controller. The time zone can also be switched to ECO function via an external switching contact on terminal U.
Art.-Nr.: DA490110
Technical data
Ambient temperature | −10 … 50 °C |
Assembly | Terminal strip, fastening screws |
Bearing temperature | –20 … 70 °C |
Colour | light grey |
Connection cross-section | 0,2 – 1,5 mm² (rigid) / 0,25 – 0,75 mm² (flex) |
Cooling control function | Yes |
Dimensions (W x H x D) | 175 mm x 90 mm x 55 mm |
Electric connection | spring push-lock terminals |
Heating control function | Yes |
Housing material | plastic ABS |
Max. air humidity (non-condensing) | 95 % r.H. |
Max. switching current | 3 (1) A |
Max. switching voltage | 230 VAC, 50 Hz |
Min. switching voltage | 230 VAC, 50 Hz |
Montage/Befestigung | wall mounting |
Number of channels/zone | 5 |
Number of outputs | 5 |
Operating voltage | 230 VAC, 50 Hz |
Potential free switching contact | No |
Protection class | IP20 |
RAL colour number (similar) | 7035 |
Surface finish | matt |
Switching contact | 5 normally open contacts |
Switching power | 920 W |
Photo | Type | Articlenumber | Features | Kind |
---|
Kontaktanfrage
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.