ITR 79.402
Temperature controller for standard rail mounting, -35…+15…°C
Electronic temperature controller for controlling and monitoring of temperatures in halls, greenhouses and underfloor heating systems. The device has a sensor failure and sensor short circuit fuse and a “heating” display. The sensor is not included in the delivery. All sensors with the number 1 can be used, e.g. KF-1. The hysteresis can be adjusted between approx. 0.5…5K.
Art.-Nr.: D4780167
Technical data
| Actual temperature display | No |
| Ambient temperature, lower value | -10 °C |
| Ambient temperature, upper value | 40 °C |
| Assembly | Controller without sensor |
| Bearing temperature, lower value | -20 °C |
| Bearing temperature, upper value | 60 °C |
| Colour | Grey |
| Connection cross-section | 0,5 mm² – 2,5 mm² |
| Control range, lower value | -35 °C |
| Control range, upper value | 15 °C |
| Cooling control function | Yes |
| Depth | 56 mm |
| ECO function (reduction) | No |
| Electric connection | Screw terminals |
| Electronic control | Yes |
| External setting | Yes |
| Heating control function | Yes |
| Heating display | Yes |
| Height | 86 mm |
| Housing material | Plastic PC |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | S: 10 (2) A; O: 5 (1,5) A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Medium | Air, not aggressive |
| Minimum switching voltage | 5 V AC / 50 Hz |
| Mounting / attachment | On supporting rails (35 mm), EN 60715 |
| Number of control ranges | 1 |
| Number of outputs | 2 |
| Operating voltage | 230 V AC / 50 Hz |
| Operation | Rotary knob |
| Output signal | Switching |
| Potential free switching contact | Yes |
| Protection class | II, following appropriate mounting |
| RAL colour number (similar) | 7035 |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sensor element | NTC external |
| Sensor external | Yes |
| Sensor type | NTC 1K (sensor 1) |
| Surface properties | Matt |
| Switching contact | Two-way contact |
| Switching difference | 0.5….5 K |
| Switching difference, can be adjusted | Yes |
| Switching element | Relay |
| Switching power | 2300 W bzw. 1150 W |
| Type of protection | IP20 |
| Width | 36 mm |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 |
AF-1 | G9040370 | External temperature sensor, NTC1K | Accessories |
 |
KF-1 | G9031442 | Cable temperature sensor, NTC1K, 1.5m, PE sensor cable, -35...+100...°C | Accessories |
 |
JZ-13 | ZA990001 | Standard rail with drill holes for attaching switch cabinet controls, length 40 mm | Accessories |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
