HF-5/4K3
Sleeve temperature sensor, NTC50K, 4m, silicon sensor cable
Sleeve temperature sensor, NTC50K, 4m, silicon sensor cable
Art.-Nr.: G9031456
Technical data
| Active temperature measurement | No |
| Ambient temperature, lower value | -50 °C |
| Ambient temperature, upper value | 150 °C |
| Connection cross-section | 2 x 0,75 mm² |
| Diameter sensor element | 8 mm |
| Length of sensor | 28 mm |
| Length of supply line | 4 m |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Medium | Gas / liquid substances (not aggressive) |
| Mounting / attachment | In imm. sleeve, prot. coil, on tube, etc |
| Passive temperature measurement | Yes |
| Protection class | II, following appropriate mounting |
| Sensor element | NTC |
| Sensor material | V2A |
| Type of protection | IP65 |
| Version of sensor | Cable sensor |
| With explosion protection | No |
| With mounting material | No |
| With supply line | Yes |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 |
HTRRB-011.410 | DA400100 | Surface temperature controller with remote sensor, surface-mounted, 20-80...°C | Suitable product |
 |
TH-280 | C1809440 | Immersion sleeve, 280mm, nickel-plated brass, inner x outer diameter 8x10mm | Accessories |
|
NTH-200 | C1809439 | Immersion sleeve, 200mm, V4A (1.4571), inner x outer diameter 8x10mm | Accessories |
|
NTH-280 | C1809441 | Immersion sleeve, 280mm, V4A (1.4571), inner x outer diameter 8x10mm | Accessories |
 |
SW-200-12 | C1809220 | Protective coil, 200mm, nickel-plated steel, inner x outer diameter 11x17mm, cable entry 11.8mm | Accessories |
|
TH-100 | C1809310 | Immersion sleeve, 100mm, nickel-plated brass, inner x outer diameter 8x10mm | Accessories |
|
TH-200 | C1809438 | Immersion sleeve, 200mm, nickel-plated brass, inner x outer diameter 8x10mm | Accessories |
|
NTH-55 | C1809284 | Immersion sleeve, 55mm, V4A (1.4571), inner x outer diameter 8x10mm | Accessories |
|
TH-55 | C1809296 | Immersion sleeve, 55mm, nickel-plated brass, inner x outer diameter 8x10mm | Accessories |
|
NTH-100 | C1809308 | Immersion sleeve, 100mm, V4A (1.4571), inner x outer diameter 8x10mm | Accessories |
 |
THF | C1809515 | Protective sleeve for screed installation of sleeves/cable sensor, copper, inner diameter 7.7mm | Accessories |
|
SW-200 | C1809219 | Protective coil, 200mm, nickel-plated steel, inner x outer diameter 11x17mm, cable entry 7.8mm | Accessories |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
