Skip to main content

Room thermostat with temperature display, surface-mounted, super-flat, 5…30°C, 230VAC, 3(0.5) A, NO contact

HTRRBd-210.100

Room thermostat with temperature display, surface-mounted, super-flat, 5…30°C, 230VAC, 3(0.5) A, NO contact

This room thermostat has been specially developed for controlling or monitoring temperatures in offices, living rooms and hotels and is suitable for the direct connection of up to 10 valve actuators (normally closed) for hot water heating systems. The display is deactivated in normal operation. The current room temperature is displayed by touching a touch surface. If a button is touched during this display, the desired setpoint temperature can be adjusted in 1 °C increments.
  • play pause
  • Art.-Nr.: MA700800

    Technical data

    Actual temperature display Yes
    Additional heating display No
    Additional heating switch No
    Ambient temperature 0 … 40 °C
    Assembly complete device
    Average power consumption 0.5 W
    Bearing temperature –20 … 70 °C
    Colour pure white
    Connection cross-section 0,33 – 1,5 mm²
    Control behaviour 2-point
    Control range 5 … 30 °C
    Cooling control function No
    Design Berlin 1000
    Dimensions (W x H x D) 78 mm x 78,5 mm x 13,9 mm
    Display Yes
    Display type Two-digit 7 segment display (white)
    ECO display No
    ECO function (reduction) No
    Electric connection screw terminals
    Electronic control Yes
    Energy efficiency class IV
    External setting Yes
    Heating control function Yes
    Heating display No
    Housing material plastic ABS
    Internal setting No
    Max. air humidity (non-condensing) 95 % r.H.
    Max. power consumption < 1 W
    Max. switching current 3 (0,5) A
    Max. switching voltage 230 VAC, 50 Hz
    Mechanical range reduction No
    Medium Air
    Min. switching voltage 230 VAC, 50 Hz
    Montage/Befestigung surface mounting
    Number of control ranges 1
    Number of outputs 1
    Number of outputs, heating 1
    Operating voltage 230 VAC, 50 Hz
    Operation touch-sensitive buttons
    Output signal switching
    Potential free switching contact No
    Power consumption in standby state 0.5 W
    Protection class II, following appropriate mounting
    RAL colour number (similar) 9010
    Reduction / heating / external reduction switch No
    Reduction switch No
    Safety and EMC in accordance with DIN EN 60730
    Scale Degree Celsius
    Schalter Ein/Aus No
    Schalter Heizen/Aus/Kühlen No
    Schalter Heizen/Kühlen No
    Sensor element NTC internal
    Sensor external No
    Surface finish gloss
    Switching contact normally open contact
    Switching difference, can be adjusted No
    Switching differential 0,5 K (delta T max. 4 K/h)
    Switching element relay
    Switching power 690 W
    Temperature controller version room thermostat
    Test mark approval CE
    Type of wiring three-/four-wire
    With receiver No

    Downloads

    Assembly instructions

    Datasheet

    Photo Type Articlenumber Features Kind
         

    Kontaktanfrage

        This form is currently undergoing maintenance. Please try again later.    

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu