Skip to main content

Room thermostat, surface-mounted, super-flat, 5…30°C, 230VAC, 2(1)A, NC contact, ECO function, heating display, ON/OFF switch

RTBSB-201.062

Room thermostat, surface-mounted, super-flat, 5…30°C, 230VAC, 2(1)A, NC contact, ECO function, heating display, ON/OFF switch

Electromechanical room thermostat in a super-flat surface-mounted housing (only 13.9 mm deep) for controlling or monitoring temperatures in offices, living rooms and hotels. A very precise switching differential is achieved through thermal feedback. The setting range can be changed using the range restriction located under the setting knob. The device is installed by means of surface/wall mounting (4-hole mounting on flush-mounted box). Suitable for hot water heating systems. The device has a heating indicator and an ON/OFF switch. If the ECO input is connected to 230 VAC, the temperature is regulated to approx. 3 K lower (night setback).
  • Art.-Nr.: MA300400

    Technical data

    Ambient temperature 0 … 30 °C
    Assembly complete device
    Bearing temperature –20 … 70 °C
    Colour pure white
    Connection cross-section 0,12 – 2,5 mm²
    Control behaviour 2-point
    Control range 5 … 30 °C
    Cooling control function No
    Design Berlin 1000
    Dimensions (W x H x D) 78 mm x 78,5 mm x 13,9 mm
    ECO function (reduction) Yes
    ECO input (reduction) 230 VAC, 50 Hz
    ECO temperature reduction approx. 3 K
    Electric connection screw terminals
    Energy efficiency class I
    External setting Yes
    Heating control function Yes
    Heating display Yes
    Housing material plastic ABS
    Internal setting No
    Max. air humidity (non-condensing) 95 % r.H.
    Max. power consumption < 0,25 W
    Max. switching current 2 (1) A
    Max. switching voltage 230 VAC, 50 Hz
    Mechanical range reduction Yes
    Medium Air
    Min. switching voltage 230 VAC, 50 Hz
    Montage/Befestigung surface mounting
    Number of control ranges 1
    Number of outputs 1
    Number of outputs, heating 1
    Operating voltage 230 VAC, 50 Hz
    Operation rotary knob and switches
    Output signal switching
    Potential free switching contact No
    Protection class II, following appropriate mounting
    RAL colour number (similar) 9010
    Safety and EMC in accordance with DIN EN 60730
    Scale Degree Celsius
    Schalter Ein/Aus Yes
    Schalter Heizen/Kühlen No
    Sensor element bimetal
    Surface finish gloss
    Switching contact NC contact
    Switching differential 0,5 K (delta T max. 4 K/h)
    Switching element bimetal contact
    Switching power 460 W
    Test mark approval CE
    Thermal feedback Yes

    Downloads

    Manual

    Datasheet

    Photo Type Articlenumber Features Kind
         

    Kontaktanfrage

       
       

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu