Skip to main content

Room thermostat, surface-mounted, super-flat, 5…30°C, 230VAC, 2(1)A, changeover contact, heating/cooling switch

RTBSB-201.065

Room thermostat, surface-mounted, super-flat, 5…30°C, 230VAC, 2(1)A, changeover contact, heating/cooling switch

Electromechanical room thermostat in a super-flat surface-mounted housing (only 13.9 mm deep) for controlling or monitoring temperatures in offices, living rooms and hotels. A very precise switching differential is achieved through thermal feedback. The setting range can be changed using the range restriction located under the setting knob. The device is installed by means of surface/wall mounting (4-hole mounting on flush-mounted box). Suitable for 2-pipe systems, especially heat pumps. The heating/cooling changeover takes place with a switch on the device.
  • Art.-Nr.: MA300500

    Technical data

    Ambient temperature 0 … 30 °C
    Assembly complete device
    Bearing temperature –20 … 70 °C
    Colour pure white
    Connection cross-section 0,12 – 2,5 mm²
    Control behaviour 2-point
    Control range 5 … 30 °C
    Cooling control function Yes
    Design Berlin 1000
    Dimensions (W x H x D) 78 mm x 78,5 mm x 13,9 mm
    ECO function (reduction) No
    Electric connection screw terminals
    Energy efficiency class I
    External setting Yes
    Heating control function Yes
    Heating display No
    Housing material plastic ABS
    Internal setting No
    Max. air humidity (non-condensing) 95 % r.H.
    Max. power consumption < 0,25 W
    Max. switching current 2 (1) A
    Max. switching voltage 230 VAC, 50 Hz
    Mechanical range reduction Yes
    Medium Air
    Min. switching voltage 230 VAC, 50 Hz
    Montage/Befestigung surface mounting
    Number of control ranges 1
    Number of outputs 1
    Number of outputs, cooling 1
    Number of outputs, heating 1
    Operating voltage 230 VAC, 50 Hz
    Operation rotary knob and switches
    Output signal switching
    Potential free switching contact No
    Protection class II, following appropriate mounting
    RAL colour number (similar) 9010
    Safety and EMC in accordance with DIN EN 60730
    Scale Degree Celsius
    Schalter Ein/Aus No
    Schalter Heizen/Kühlen Yes
    Sensor element bimetal
    Surface finish gloss
    Switching contact two-way contact
    Switching differential Heating/cooling: 0,5 K (delta T max. 4 K/h)
    Switching element bimetal contact
    Switching power 460 W
    Test mark approval CE
    Thermal feedback Yes

    Downloads

    Manual

    Datasheet

    Photo Type Articlenumber Features Kind
         

    Kontaktanfrage

       
       

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu