Skip to main content

Room thermostat, surface-mounted, 5…30…°C, 230V AC, NC contact, heating display

RTBSB-001.096

Room thermostat, surface-mounted, 5…30…°C, 230V AC, NC contact, heating display

Electro-mechanical room thermostat in surface-mounted housing for controlling and monitoring temperatures in offices, residential properties and hotels. Especially suitable for controlling more powerful electric heating systems. Thermal feedback is used to obtain a very accurate switching difference (do not connect N terminal if heating power is 1500W or above). The device has a heating display. The setting range can be adjusted using the range reducer located under the adjustment knob.
  • Art.-Nr.: MA012500

    Technical data

    Actual temperature display No
    Ambient temperature, lower value 0 °C
    Ambient temperature, upper value 30 °C
    Assembly Complete device
    Bearing temperature, lower value -20 °C
    Bearing temperature, upper value 70 °C
    Colour Pure white
    Connection cross-section 0,12 mm² bis 2,5 mm²
    Control behaviour 2-point
    Control range, lower value 5 °C
    Control range, upper value 30 °C
    Cooling control function No
    Depth 25,5 mm
    Design Berlin 2000
    Display No
    ECO function (reduction) No
    Electric connection Screw terminals
    Electronic control No
    Energy efficiency class I
    External setting Yes
    Heating / cooling switch No
    Heating control function Yes
    Heating display Yes
    Height 83,4 mm
    Housing material Plastic ABS
    Internal setting No
    Maximum air humidity (non-condensing) 95 % r.H
    Maximum power consumption < 0.5W
    Maximum switching current 13 (4) A
    Maximum switching voltage 230 V AC, 50 Hz
    Mechanical range reduction Yes
    Medium Air, not aggressive
    Minimum switching voltage 230 V AC / 50 Hz
    Mounting / attachment Surface mounting
    Number of control ranges 1
    Number of outputs 1
    Number of outputs, heating 1
    On / Off switch No
    Operating voltage 230 V AC / 50 Hz
    Operation Rotary knob
    Output signal Switching (230 V AC, 50 Hz)
    Potential free switching contact No
    Protection class II, following appropriate mounting
    RAL colour number (similar) 9010
    Safety and EMC In accordance with DIN EN 60730
    Scale Index number scale 1…6
    Sensor element Bimetal
    Sensor external No
    Surface properties Matt
    Switching contact NC contact
    Switching difference Approx. 1 K (delta T max. 4 K/h)
    Switching difference, can be adjusted No
    Switching element Bimetal contact
    Switching power 3000 W
    Temperature controller version Room thermostat
    Test mark approval CE
    Thermal feedback Yes
    Type of protection IP30
    Width 78,3 mm
    With explosion protection No
    Circuit diagram  Circuit diagram

    Downloads

    Instructions

    Datasheet

    Photo Type Articlenumber Features Kind
    JZ-19 MN990003 Plug-in socket fully pre-wired; it can be completed with RTBSB-001.086 or RTBSB-001.096 room thermostats Suitable product
    ZBOOA-010.100 H9100010 Heating valve actuator, 230V AC, closed when de-energised Accessories
    VOOPL-216.176 DA480510 Terminal strip, max. 6 room thermostats and 12 valve actuators, IP20 Accessories
    VOOPL-318.178 DA480520 Terminal strip, max. 8 room thermostats and 16 valve actuators, IP20 Accessories
    ZBOOA-010.185 G8990010 Valve actuator "Stella" 230V NC for the fully automatic hydraulic compensation Accessories
    ET-10 MA990002 Adjustment knob for devices in B2000 series, scale 1...6, pure white, gloss Accessories
     

    Contact request

      This form is currently undergoing maintenance. Please try again later.

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu