KTRTB-211.108
Room thermostat, heating/cooling, surface-mounted super flat, 230V AC, silent (Triac)
This controller was specially developed for heating/cooling control in 2-pipe pipe systems for hotels, residential and commercial premises and can control up to 5 valve actuators (normally closed). The KTRTB detects the room temperature with an internal sensor and activates the heating or cooling according to the deviation from the setpoint. The use of a triac as a switching element instead of a relay/bimetal means that there is no switching noise during operation. With an internal switch, the existing contact input can be configured as an ECO contact or standby contact. ECO function: If this function is selected, the temperature is reduced by 3K in heating mode and increased by 3K in cooling mode. Standby function: If this function is selected, the controller is switched off (frost protection is still active). Surface/wall mounting (4-hole mounting on the flush-mounted box).
Art.-Nr.: MA700300
Technical data
| Actual temperature display | No |
| Additional heating switch | No |
| Ambient temperature, lower value | 0 °C |
| Ambient temperature, upper value | 40 °C |
| Assembly | Complete device |
| Bearing temperature, lower value | -20 °C |
| Colour | Pure white |
| Control behaviour | Switching PWM |
| Control range, lower value | 5 °C |
| Control range, upper value | 30 °C |
| Cooling control function | Yes |
| Degree of contamination | 2 |
| Depth | 13,9 mm |
| Design | Berlin 1000 |
| Display | No |
| ECO function (reduction) | Yes |
| ECO input (reduction) | 230 V AC, 50 Hz |
| Electric connection | Screw terminals |
| Electronic control | Yes |
| External setting | Yes |
| Heating / cooling switch | No |
| Heating control function | Yes |
| Height | 78,5 mm |
| Housing material | Plastic ABS |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum power consumption | < 0.8 W |
| Maximum switching current | 65 mA |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Mechanical range reduction | Yes |
| Medium | Air, not aggressive |
| Minimum switching voltage | 230 V AC / 50 Hz |
| Mounting / attachment | Surface mounting |
| Number of control ranges | 1 |
| Number of outputs | 1 |
| Number of outputs, cooling | 1 |
| Number of outputs, heating | 1 |
| On / Off switch | No |
| Operating voltage | 230 V AC / 50 Hz |
| Operation | Rotary knob |
| Output signal | Switching PWM, 230 V AC, 50 Hz |
| Potential free switching contact | No |
| Proportional range | Approx. 1 K |
| Protection class | II, following appropriate mounting |
| RAL colour number (similar) | 9010 |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sealable | No |
| Sensor element | NTC internal |
| Sensor external | No |
| Surface properties | Gloss |
| Switch/lamp night-time reduction | No |
| Switching contact | NC contact |
| Switching difference | 0 K, as controlled almost constantly |
| Switching difference, can be adjusted | No |
| Switching element | Triac |
| Switching power | 15 W |
| Temperature controller version | Climate controller |
| Thermal feedback | No |
| Type of protection | IP30 |
| Width | 78 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 |
ET-01 | MA990000 | Adjustment knob for devices in B1000 series, degrees Celsius scale, pure white, gloss | Spare part |
 |
JZ-21 | MN990006 | Adapter frame for device in Berlin 1000 series | Accessories |
 |
ZBOOA-010.100 | H9100010 | Heating valve actuator, 230V AC, closed when de-energised | Accessories |
 |
ET-02 | MA990001 | Adjustment knob for devices in B1000 series, numerical scale 1...6, pure white, gloss | Accessories |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
