IKF1P1000/50
Industrial built-in duct temperature sensor, PT1000, installation length 65mm
The IKF1 industrial installation duct sensor is used to measure the temperatures of liquids and gases in pipelines, air ducts or containers in machines, apparatus, and plant construction. For use in air ducts, the mounting flange (MF) is required. For use in liquids, immersion sleeves made of nickel-plated brass (THMs) must be used. For aggressive media, immersion sleeves made of stainless steel V4A (THV) are recommended. Immersion sleeves or mounting flange are not included in the scope of delivery and must be ordered separately as accessories.
Art.-Nr.: G9150020
Technical data
| Active temperature measurement | No |
| Ambient temperature, lower value | -30 °C |
| Ambient temperature, upper value | 100 °C |
| Bearing temperature, lower value | -30 °C |
| Bearing temperature, upper value | 100 °C |
| Connection cross-section | 0,14 mm² bis 2,5 mm² |
| Cover fastening | Screw fastening |
| Diameter sensor element | 6 mm |
| Electric connection | Screw terminals |
| Housing material | Aluminum |
| Max. sensor temperature | 150 °C |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Medium | Gas / liquid substances (not aggressive) |
| Mounting / attachment | Immersion sleeves or mounting flange |
| Passive temperature measurement | Yes |
| Plug-in length | 65 mm |
| Protection class | III |
| Safety and EMC | In accordance with DIN EN 60730 |
| Sensor element | Pt1000 |
| Sensor element inside the housing | No |
| Sensor element outside the housing | Yes |
| Suitable for fluids | Yes |
| Suitable for gases | Yes |
| Surface properties | Matt |
| Temperature measuring range lower value | -30 °C |
| Temperature measuring range upper value | 150 °C |
| Type of protection | IP43 |
| Version of sensor | Temperature sensor for gases/liquids |
| With explosion protection | No |
| With housing | Yes |
| With mounting material | No |
| With supply line | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 |
THV/50 | G9990060 | Immersion sleeve, 50mm, V4A 1.4571, inner x outer diameter 6.3x9mm | Accessories |
 |
MF | G9990160 | Mounting flange for built-in duct sensor EKF/IKF/GFL | Accessories |
 |
THMs/50 | G9990010 | Immersion sleeve, 50mm, nickel-plated brass with insertion, inner x outer diameter 6.5x8mm | Accessories |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
