JTF-3
Frost protection thermostat, capillary length 1.8m, external setting
For securing hot water heating coils against freezing. The unit is intrinsically safe and has a sealable setpoint adjustment.
Protective coil SW-200-12 must be used for measuring the temperature of non-aggressive gases in the duct; immersion sleeve TH-140 must be used to measure temperatures in non-aggressive fluids; in aggressive fluids, immersion sleeve NTH-140 must be used. Mounting brackets, immersion sleeves and protective coils are not included in the delivery and must be ordered separately.
Art.-Nr.: E6090309
Technical data
| Ambient temperature, lower value | -10 °C |
| Ambient temperature, upper value | 55 °C |
| Bearing temperature, lower value | -10 °C |
| Bearing temperature, upper value | 55 °C |
| Capillary length | 1,8 m |
| Colour | Grey |
| Contact interlocking | No |
| Control range, lower value | -10 °C |
| Control range, upper value | 12 °C |
| Cooling control function | Yes |
| Degree of contamination | 2 |
| Depth | 55 mm |
| Device version | Surface-mounted unit |
| Diameter sensor element | 9,5 mm |
| Electric connection | Screw terminals |
| Electronic control | No |
| External setting | Yes |
| Function type (systems engineering) | TR |
| Heating control function | Yes |
| Height | 105 mm |
| Housing material | Lower part metal, upper part plastic |
| Internal setting | No |
| Length of sensor | 76 mm |
| Max. sensor temperature | 200 °C |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | 15 (8) A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Medium | Air, not aggressive |
| Minimum switching current | 150 mA |
| Minimum switching voltage | 24 V AC / 50 Hz |
| Mounting / attachment | Wall mounting |
| Number of control ranges | 1 |
| Number of outputs | 2 |
| Operating voltage | None |
| Operation | Empty |
| Output signal | Switching |
| Potential free switching contact | Yes |
| Protection class | I |
| Rated impulse voltage | 4000 V |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sensor element | Capillary tube |
| Sensor material | Cu |
| Surface properties | Matt |
| Switching contact | Two-way contact |
| Switching difference | Approx. 1 K |
| Switching difference, can be adjusted | No |
| Switching element | Microswitch |
| Switching power | 3450 W |
| Type of protection | IP40 |
| Width | 112 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 |
JZ-07 | E6160145 | Mounting bracket for frost protection thermostat JTF | Accessories |
 |
JZ-05/1M | C1809462 | Individual mounting bracket (metal) for frost protection thermostat JTF / RTKSA | Accessories |
 |
JZ-05/6K | C1809536 | Mounting brackets (plastic) for frost protection thermostat JTF / RTKSA, 6 pcs. | Accessories |
 |
SW-200-12 | C1809220 | Protective coil, 200mm, nickel-plated steel, inner x outer diameter 11x17mm, cable entry 11.8mm | Accessories |
 |
TH-140 | C1809409 | Immersion sleeve, 140mm, nickel-plated brass, inner x outer diameter 10x12mm | Accessories |
 |
JZ-04 | E6160133 | Capillary tube duct for JTF frost protection thermostats and JMT/WR/JET capillary controllers | Accessories |
 |
JZ-05/6M | C1809474 | Mounting brackets (metal) for frost protection thermostat JTF/RTKSA, 6 pcs. | Accessories |
|
NTH-140 | C1809435 | Immersion sleeve, 140mm, V4A (1.4571), inner x outer diameter 10x12mm | Accessories |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
