RTKSA-204.000
Frost protection thermostat, 1.8m, IP40, hysteresis 1.5K, STW, internal setting, external resetting
The RTKSA frost protection controllers were specially developed for air or water-side frost protection of hot water heater registers and heat exchangers in ventilation, heating or air conditioning systems. If the sensor breaks, contact 1 – 2 is permanently opened and contact 1 – 4 is permanently closed. Note: Mounting brackets, immersion sleeves and protective coils are not included in the scope of delivery and must be ordered separately. Air-side application: The SWK-2-xxx protective coils can be used to measure the temperature of non-aggressive gases in the duct. Water-side application: For temperature measurement in non-aggressive fluids, the immersion sleeves THK-2-xxx and in aggressive fluids the immersion sleeves NTHK-2-xxx can be used.
Art.-Nr.: KA020400
Technical data
| Ambient temperature, upper value | 80 °C |
| Bearing temperature, lower value | -30 °C |
| Bearing temperature, upper value | 80 °C |
| Capillary length | 1,8 m |
| Colour | Anthr. grey (RAL7016), frontp. transp. |
| Contact interlocking | Yes |
| Control range, lower value | -10 °C |
| Control range, upper value | 15 °C |
| Cooling control function | Yes |
| Depth | 53 mm |
| Device version | Surface-mounted unit |
| Diameter sensor element | 9,5 mm |
| Electric connection | Push-in terminal |
| Electronic control | No |
| External setting | No |
| Function type (systems engineering) | STW |
| Heating control function | Yes |
| Height | 146,8 mm |
| Internal setting | Yes |
| Length of sensor | 98 mm |
| Max. sensor temperature | 120 °C |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | O: 16 (2,5) A; S: 6,3 (2,5) A, 0,25 ADC |
| Maximum switching voltage | 230 V AC 50 / 60 Hz, 230 V DC |
| Minimum switching current | At 24 V (AC/DC) min. 100 mA |
| Minimum switching voltage | 24 V AC / 50 Hz, 24 V DC |
| Mounting / attachment | Wall mounting |
| Number of control ranges | 1 |
| Number of outputs | 2 |
| Operating voltage | None |
| Operation | Internal setpoint adjuster |
| Output signal | Switching |
| Potential free switching contact | Yes |
| Protection class | I |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sensor element | Capillary tube |
| Sensor material | Cu |
| Switching contact | Two-way contact |
| Switching difference | 1.5 K |
| Switching difference, can be adjusted | No |
| Switching element | Microswitch |
| Type of protection | IP40 |
| Width | 57,6 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 |
JZ-29 | KA999901 | Fastening set for RTKSA THK/NTHK/SWK single controller | Accessories |
 |
SWK-2-100 | KA989901 | Protective coil, 100mm, nickel-plated steel, inner x outer diameter 10.5x17mm | Accessories |
|
SWK-2-200 | KA989903 | Protective coil, 200mm, nickel-plated steel, inner x outer diameter 10.5x17mm | Accessories |
 |
JZ-33 | KA999904 | Sealing set for universal capillary thermostats RTKSA-xxx.xxx | Accessories |
 |
TH-140 | C1809409 | Immersion sleeve, 140mm, nickel-plated brass, inner x outer diameter 10x12mm | Accessories |
|
NTH-140 | C1809435 | Immersion sleeve, 140mm, V4A (1.4571), inner x outer diameter 10x12mm | Accessories |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
