Skip to main content

Flush-mounted room thermostat, 230VAC, NC contact, display/switch additional heating, alre frame, cover 50x50mm, pure white, glossy

RTBSU-401.052#21

Flush-mounted room thermostat, 230VAC, NC contact, display/switch additional heating, alre frame, cover 50x50mm, pure white, glossy

Electromechanical flush-mounted room thermostat for controlling or monitoring temperatures in offices, living rooms and hotels. Fits perfectly into many switch ranges without an intermediate frame. Suitable for all types of heating. The switch can be used to switch an additional heater. A red lamp indicates that additional heating has been switched on. The total current (heating + additional heating) must not exceed 10 (4) A. The total power (heating + additional heating) must not exceed 2300 W. A very precise switching differential is achieved through thermal feedback. The setting range can be changed using the range restriction located under the setting knob. Simple electrical connection without screws. New terminals for quick and easy installation. Simplified wiring thanks to color coding of the terminals. Time-saving thanks to modular design: practical assembly sequence of controller, frame and cover. Small installation volume for convenient and quick installation in the flush-mounted box. Temperature control already possible without cover. Closed design. Optimum screw mounting.
  • play pause
  • Art.-Nr.: UA090015

    Technical data

    Additional heating display Yes
    Additional heating switch Yes
    Ambient temperature 0 … 30 °C
    Assembly complete device
    Bearing temperature –20 … 70 °C
    Colour pure white
    Connection cross-section 1 – 2,5 mm² (rigid) / 0,75 – 1,5 mm² (flex)
    Control behaviour 2-point
    Control range 5 … 30 °C
    Cooling control function No
    Design Berlin UP
    Dimensions (W x H x D) 81 mm x 85 mm x 41,8 mm
    ECO display No
    ECO function (reduction) No
    Electric connection spring push-lock terminals
    Energy efficiency class I
    External setting Yes
    Heating control function Yes
    Heating display No
    Housing material plastic PA6, PC
    Internal setting No
    Max. air humidity (non-condensing) 95 % r.H.
    Max. power consumption < 0,5 W
    Max. switching current 10 (4) A
    Max. switching voltage 230 VAC, 50 Hz
    Mechanical range reduction Yes
    Medium Air
    Min. switching voltage 230 VAC, 50 Hz
    Montage/Befestigung flush mounting (deep socket recommended)
    Number of control ranges 1
    Number of outputs 2
    Number of outputs, heating 2
    Operating voltage 230 VAC, 50 Hz
    Operation rotary knob and switches
    Output signal switching
    Potential free switching contact No
    Protection class II, following appropriate mounting
    Protective cap No
    RAL colour number (similar) 9010
    Reduction / heating / external reduction switch No
    Reduction switch No
    Safety and EMC in accordance with DIN EN 60730
    Scale Index number scale
    Schalter Ein/Aus No
    Schalter Heizen/Aus/Kühlen No
    Schalter Heizen/Kühlen No
    Sensor element bimetal
    Surface finish gloss
    Switching contact NC contact
    Switching differential 0,5 K (delta T max. 4 K/h)
    Switching element bimetal contact
    Switching power 2300 W
    Test mark approval CE
    Thermal feedback Yes

    Downloads

    Assembly instructions

    Sales brochure

    Datasheet

    Photo Type Articlenumber Features Kind
         

    Kontaktanfrage

       
       

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu