Skip to main content

Differential pressure switch, 30…500Pa, internal setting, mounting bracket

JDW-5 Z

Differential pressure switch, 30…500Pa, internal setting, mounting bracket

Differential pressure switch for monitoring overpressure, differential pressure or negative pressure of air and non-flammable, non-aggressive gases. Can be used as a fume cupboard or fan monitor or flow monitor to protect electrical heating registers, as a filter monitor, low air pressure protection or limit value controller. Note: Once the differential pressure switch has switched a voltage > 24 V and a current > 0.1 A, the gold coating on the contacts is burnt off. After this, the differential pressure switch can only be operated with this or a higher power. Note: The JZ-06/1 hose set is not included in the scope of delivery and must be ordered separately. Supplied with attached mounting bracket JZ-10.
  • Art.-Nr.: H531000

    Technical data

    Ambient temperature −15 … 80 °C
    Bearing temperature –15 … 80 °C
    Colour black
    Control function, overpressure or underpressure Yes
    Degree of contamination 2
    Electric connection screw terminals
    Electronic version No
    External setting No
    Function type (systems engineering) monitor
    Housing material plastic
    Internal setting Yes
    Max. air humidity (non-condensing) 95 % r.H.
    Max. Pressure 5000 Pa
    Max. switching current 1,5 (0,4) A (230 VAC), (1)  (24 VAC), 0,2 A (30 VDC)
    Max. switching voltage 230 VAC, 50 Hz / 24 VDC
    Medium Air
    Medium temperature −15 … 80 °C
    Min. switching current 1 mA
    Min. switching voltage 12 VAC, 50 Hz / 12 VDC
    Montage/Befestigung wall mounting
    Number of control ranges 1
    Number of outputs 2
    Operation internal setpoint adjuster
    Output signal switching
    Potential free switching contact Yes
    Pressure connection 6.2 mm
    Protection class II, following appropriate mounting
    Regelbereich Druck 30 … 500 Pa
    Safety and EMC in accordance with DIN EN 60730
    Sensor element pressure membrane
    Surface finish matt
    Switching contact two-way contact
    Switching differential 25 … 10 Pa
    Switching element microswitch
    With explosion protection No

    Downloads

    Manual

    Datasheet

         

    Kontaktanfrage

        This form is currently undergoing maintenance. Please try again later.    

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu