JET-140 X
Capillary thermostat, wall mounting, 70…130…°C, adjustable hysteresis 2..20K, external setting, capillary length 1.8m
Monitoring or control of temperatures of non-aggressive, liquid and gaseous media. Especially suitable for wall mounting. For temperature control of non-aggressive gases in the duct, use the thermowell SW-200-12, for temperature control in non-aggressive fluids use the thermowell TH, in aggressive fluids use the thermowell NTH. Thermowells or protection coils are not included in the scope of delivery.
Art.-Nr.: JA043100
Technical data
| Ambient temperature, lower value | -20 °C |
| Ambient temperature, upper value | 55 °C |
| Bearing temperature, lower value | -20 °C |
| Bearing temperature, upper value | 55 °C |
| Capillary length | 1,8 m |
| Colour | Grey |
| Control range, lower value | 70 °C |
| Control range, upper value | 130 °C |
| Cooling control function | Yes |
| Degree of contamination | 2 |
| Device version | Surface-mounted unit |
| Diameter sensor element | 9,6 mm |
| Electric connection | Screw terminals |
| Electronic control | No |
| External setting | Yes |
| Function type (systems engineering) | TR |
| Heating control function | Yes |
| Housing material | Plastic |
| Internal setting | No |
| Length of sensor | 122 mm |
| Max. sensor temperature | 145 °C |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching current | 15 (8) A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Mechanical range reduction | Yes |
| Medium | Gas / liquid substances (not aggressive) |
| Minimum switching current | 150 mA |
| Minimum switching voltage | 24 V AC / 50 Hz |
| Mounting / attachment | Wall mounting |
| Number of control ranges | 1 |
| Number of outputs | 2 |
| Operating voltage | None |
| Operation | Rotary knob |
| Output signal | Switching |
| Potential free switching contact | Yes |
| Protection class | I |
| RAL colour number (similar) | 7016/7035 |
| Rated impulse voltage | 4000 V |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Degree Celsius |
| Sensor element | Capillary tube |
| Sensor material | Cu (capillaries made from V2A) |
| Surface properties | Matt |
| Switching contact | Two-way contact |
| Switching difference, can be adjusted | Yes |
| Switching differential adjustable from | 2 K |
| Switching differential adjustable up to | 20 K |
| Switching element | Microswitch |
| Switching power | 3450 W |
| Type of protection | IP65 |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|---|---|---|---|
 |
SW-200-12 | C1809220 | Protective coil, 200mm, nickel-plated steel, inner x outer diameter 11x17mm, cable entry 11.8mm | Accessories |
 |
TH-140 | C1809409 | Immersion sleeve, 140mm, nickel-plated brass, inner x outer diameter 10x12mm | Accessories |
 |
JZ-04 | E6160133 | Capillary tube duct for JTF frost protection thermostats and JMT/WR/JET capillary controllers | Accessories |
|
NTH-140 | C1809435 | Immersion sleeve, 140mm, V4A (1.4571), inner x outer diameter 10x12mm | Accessories |
Contact request
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
