VOOPL-216.176
Terminal strip, max. 6 room thermostats and 12 valve actuators, IP20
This device was specially developed for wiring 230 V~ individual room temperature controllers with the associated valve actuators for fixed installation. The terminal block is suitable for heating controllers with or without ECO function as well as for heating/cooling controllers with integrated heating/cooling changeover switch. A master-slave control can be created by using a clock controller or an external timer. Depending on the controller used, valve actuators with NC (normally closed) or NO (normally open) can be connected to this terminal strip.
Art.-Nr.: DA480510
Technical data
| Ambient temperature | −10 … 50 °C |
| Assembly | Terminal strip, fastening screws |
| Bearing temperature | –20 … 70 °C |
| Colour | anthracite |
| Connection cross-section | 0,75 – 1,5 mm² (rigid) / 0,5 – 1 mm² (flex) |
| Cooling control function | Yes |
| Dimensions (W x H x D) | 197 mm x 100 mm x 61,5 mm |
| Electric connection | spring push-lock terminals |
| Heating control function | Yes |
| Housing material | plastic PC |
| Max. air humidity (non-condensing) | 95 % r.H. |
| Max. switching voltage | 230 VAC, 50 Hz |
| Min. switching voltage | 230 VAC, 50 Hz |
| Montage/Befestigung | surface mounting or standard rail |
| Number of channels/zone | 6 |
| Number of outputs | 6 |
| Operating voltage | 230 VAC, 50 Hz |
| Potential free switching contact | No |
| Protection class | IP20 |
| Surface finish | gloss |
| Photo | Type | Articlenumber | Features | Kind |
|---|
Kontaktanfrage
This form is currently undergoing maintenance. Please try again later.Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
