Skip to main content

Room thermostat, flush-mounted, 230V AC, NC contact, heating display, cover 55x55mm, pure white, gloss

FTR 101.034#55

Room thermostat, flush-mounted, 230V AC, NC contact, heating display, cover 55x55mm, pure white, gloss

Electro-mechanical flush-mounted room thermostat for controlling and monitoring of temperatures in offices, residential properties and hotels. Provides a perfect visual match in many switch ranges without any intermediate frames. Suitable for all types of heating. The device has a heating display. Thermal feedback is used to obtain a very accurate switching difference. The setting range can be adjusted using the range reducer located under the adjustment knob.
  • Art.-Nr.: UA012405

    Technical data

    Actual temperature displayNo
    Additional heating displayNo
    Additional heating switchNo
    Ambient temperature, lower value0 °C
    Ambient temperature, upper value30 °C
    AssemblyBasic device with cover
    Bearing temperature, lower value-20 °C
    Bearing temperature, upper value70 °C
    ColourPure white
    Connection cross-section0,5 mm² bis 1,5 mm²
    Control behaviour2-point
    Control range, lower value5 °C
    Control range, upper value30 °C
    Cooling control functionNo
    Depth42,5 mm
    DesignBerlin UP
    ECO displayNo
    ECO function (reduction)No
    Electric connectionScrew terminals
    Electronic controlNo
    Energy efficiency classI
    External settingYes
    Heating / cooling switchNo
    Heating / off / cooling switchNo
    Heating control functionYes
    Heating displayYes
    Height71 mm
    Housing materialPlastic PC
    Internal settingNo
    Maximum air humidity (non-condensing)95 % r.H
    Maximum power consumption< 0.5W
    Maximum switching current10 (4) A
    Maximum switching voltage230 V AC, 50 Hz
    Mechanical range reductionYes
    MediumAir, not aggressive
    Minimum switching voltage230 V AC / 50 Hz
    Mounting / attachmentFlush mounting (deep socket recommended)
    Number of control ranges1
    Number of outputs1
    Number of outputs, heating1
    On / Off switchNo
    Operating voltage230 V AC / 50 Hz
    OperationRotary knob
    Output signalSwitching (230 V AC, 50 Hz)
    Potential free switching contactNo
    Protection classII, following appropriate mounting
    Protective capNo
    RAL colour number (similar)9010
    Reduction / heating / external reduction switchNo
    Reduction switchNo
    Safety and EMCIn accordance with DIN EN 60730
    ScaleIndex number scale *…6
    Sensor elementBimetal
    Sensor externalNo
    Surface propertiesGloss
    Switching contactNC contact
    Switching differenceApprox. 0.5 K (delta T max. 4 K/h)
    Switching difference, can be adjustedNo
    Switching elementBimetal contact
    Switching power2300 W
    Temperature controller versionRoom thermostat
    Test mark approvalCE
    Thermal feedbackNo
    Type of protectionIP30
    Width71 mm
    With explosion protectionNo
    Circuit diagram Circuit diagram


    Info sheet



    ZBOOA-010.100H9100010Heating valve actuator, 230V AC, closed when de-energisedAccessories
    VOOPL-216.176DA480510Terminal strip, max. 6 room thermostats and 12 valve actuators, IP20Accessories
    VOOPL-318.178DA480520Terminal strip, max. 8 room thermostats and 16 valve actuators, IP20Accessories
    JZ-090.100VV000048alre frame "Berlin" for all flush-mounted devices with cover 55x55, pure white (RAL9010), glossAccessories

    Contact request


    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu