Art.-No.: H530946

Features:
Flow monitor for 1", mechanical, adjustable, Toggler, 24-230 VAC, 5A

Application:

Technical Data:

Dimensions of housing:66 x 30 x 35 mm
Number of outputs:2
Output signal:switching
Output signal:switching
Configuration:max. flow: 60 l / min
Rated impulse voltage:4000 V
Operating voltage:none
Pressure:yes
setting range:Break point dropping: 13,5...16,5 l / min
Electrical connection:4-pin plug according to DIN EN 175301-803 (previously DIN 43650 - A / ISO 4400)
Colour of housing:black
Sensor:Flow paddle
Function type:Monitors
Accuracy:+/- 15% of the set value (switching values only hold good if the flow monitor has been installed in our T-piece If copper T-pieces are used, the switching values will increase.)
Weight:ca. 300
Hysteresis:approx. 3,5 l / min
Internal setting:yes
Storage temperature:-20...70°C
Scope of supply:Flow monitor with union nut, MS brazing spout
Material of housing:Plastic
Material of paddle:Special steel
Material of carrier:MS nickel-plated
max. pressure:25 bar
max. switching voltage:230 VAC, 50 Hz
max. switching current:5:00 AM
Medium:Fluid, non-aggressive
min. switching voltage:24 VAC, 50 Hz
min. switching current:100 mA at 24 VAC, 50 Hz
Installation/fastening:Union nut G 3/8" on brazing spout (for brazing in a standard copper T-piece with outlet 1/2") or T-piece
Surface quality:matt
potential-free:yes
control range:Break point rising: 17,0...20,5 l / min
Control function:switches if the set value undershot or exceeded
Pipe diameter:1" / DN25
Switching element:micro switch
Switching contact:Changeover
Switching power:1150 W
Degree of protection:IP 65
Protection class:II
Safety and EMC:according to DIN EN 60730
Flow of liquid media:yes
Ambient temperature up to:70
Ambient temperature from:-20
Degree of fouling:II
permissible medium temperature:110°C
Permissible atmospheric humidity:max. 95% r.h., non-condensing
Ciruit Diagram: