Art.-No.: JA060100

Flow monitor for 1...8", mechanical, adjustable, Toggler, 24-230 VAC, 15(8)A


Technical Data:

Dimensions of housing:130 x 71 x 67 mm
Number of outputs:2
Output signal:switching
Output signal:switching
Rated impulse voltage:4000 V
Operating voltage:none
setting range:The setting and control range depend on the pipe diameter (see the table of switching values in the assembly instructions)
Electrical connection:Screw-type terminals
Colour of housing:grey (lower part like RAL 7016, upper part like RAL 7035)
Sensor:Flow paddle
Function type:Monitors
Accuracy:+/- 15% of the set value
Weight:ca. 900
Hysteresis:depends on the pipe diameter (see the table of switching values in the assembly instructions)
Internal setting:yes
Storage temperature:-40...85°C
Scope of supply:Flow monitor, paddle set
Material of housing:Plastic
Material of paddle:Special steel
Material of carrier:Ms
max. pressure:8 bar
max. switching voltage:230 VAC, 50 Hz
max. switching current:15 (8) A
Medium:Fluid, non-aggressive
min. switching voltage:24 VAC, 50 Hz
min. switching current:150 mA at 24 VAC, 50 Hz
Installation/fastening:Assembly by means of tapered Whitworth pipe thread R1"
Surface quality:matt
Test mark/Approbation:type-tested by the TÜV according to the VdTÜV circular "Flow 100" Component identification no. TÜV S. 04-016
Control function:switches if the set value undershot or exceeded
Pipe diameter:1...8"
Switching element:Microswitch
Switching contact:Changeover
Switching power:3450 W
Degree of protection:IP 65
Protection class:I
Safety and EMC:according to DIN EN 60730
Flow of liquid media:yes
Ambient temperature up to:85
Ambient temperature from:-40
Degree of fouling:II
Accessories:spare paddle: JZ-09
permissible medium temperature:120°C
Permissible atmospheric humidity:max. 95% r.h., non-condensing
Ciruit Diagram: