: H530998
:
Differential pressure switch, mechanical, 40Pa, monitor, , Toggler, 12-230 VAC, 5(1)AAC, 12-24 VDC, 1(0,2)ADC, hysteresis approx. 15Pa
:
Monitoring of overpressure, differential or under-pressure of air and incombustible, non-aggressive gases. Exhaust or fan monitoring or flow monitor for securing electrical heat registers, as filter monitoring, air pressure shortage safeguard, limit value controller.
JDW-...: Supplied without mounting bracket, can be screwed on directly (with 2 screws).
JDW-...Z: Supplied with attached mounting bracket JZ-10.
JDL-...: Supplied with attached mounting bracket JZ-10.
Note: Once the differential pressure switch has connected a voltage > 24 V and a current > 0,1 A, the gold layer at the contacts will have burnt away. Thereafter, the differential pressure switch can only be operated at this or a higher power.
Note: The hose set is not a part of the delivery scope and must be ordered separately.
:
: | 86 x 41,5 x 90 mm |
: | 2 |
: | 1 |
: | switching |
: | switching |
: | 4000 V |
: | none |
: | |
: | 6,2 mm |
: | all data in Pa |
: | Spade plug |
: | black |
: | Pressure membrane |
: | Monitors |
: | approx. 15 Pa |
: | -15...+80 °C |
: | Differential pressure switch |
: | Plastic |
: | 5000 Pa |
: | 80 |
: | 230 VAC, 50 Hz 24 VDC |
: | 5 (1) AAC 1 (0,2) ADC |
: | Air, not aggressive |
: | 12 VAC, 50 Hz 12 VDC |
: | 1 mA |
: | Wall mounting |
: | matt |
: | |
: | switches if the pressure is undershot or overshot |
: | Microswitch |
: | Toggler, gold contact |
: | 1150 WAC, 24 WDC |
: | IP 20 |
: | II |
: | according to DIN EN 60730 |
: | 80 |
: | -15 |
: | II |
: | 40 Pa fixed |
: | connection set: JZ-06/1, installation bracket: JZ-10 |
: | -15...+80°C |
: | max. 95% r.h., non-condensing |
: | ![]() |