Art.-No.: H531000

Features:
Differential pressure switch with angle bracket, mechanical, 30...500Pa, monitor, , Toggler, 12-230 VAC, 1,5(0,4)AAC, 12-24 VDC, 1(0,2)ADC, hysteresis 10...25Pa

Application:
Monitoring of overpressure, differential or under-pressure of air and incombustible, non-aggressive gases. Exhaust or fan monitoring or flow monitor for securing electrical heat registers, as filter monitoring, air pressure shortage safeguard, limit value controller.

JDW-...: Supplied without mounting bracket, can be screwed on directly (with 2 screws).
JDW-...Z: Supplied with attached mounting bracket JZ-10.
JDL-...: Supplied with attached mounting bracket JZ-10.

Note: Once the differential pressure switch has connected a voltage > 24 V and a current > 0,1 A, the gold layer at the contacts will have burnt away. Thereafter, the differential pressure switch can only be operated at this or a higher power.

Note: The hose set is not a part of the delivery scope and must be ordered separately.

Technical Data:

Dimensions of housing:86 x 46,5 x 90 mm
Number of outputs:2
Number, control range:1
Output signal:switching
Output signal:switching
Rated impulse voltage:4000 V
Operating voltage:none
Pressure:yes
Pressure connection:6,2 mm
setting range to:500
setting range:all data in Pa
setting range from:30
Electrical connection:Screw-type terminals
Colour of housing:black
Sensor:Pressure membrane
Function type:Monitors
Hysteresis:approx. 10...25 Pa depending on the setting range
Internal setting:yes
Storage temperature:-15...+80 °C
Scope of supply:Differential pressure switch with angle bracket
Material of housing:Plastic
max. pressure:5000 Pa
max. sensor temperature:80
max. switching voltage:230 VAC, 50 Hz 24 VDC
max. switching current:1,5 (0,4) AAC 1 (0,2) ADC
Medium:Air, not aggressive
min. switching voltage:12 VAC, 50 Hz 12 VDC
min. switching current:1 mA
Installation/fastening:Wall mounting
Surface quality:matt
potential-free:yes
Control range up to:500
Control range from:30
Control function:switches if the pressure is undershot or overshot
Switching element:Microswitch
Switching contact:Toggler, gold contact
Switching power:345 WAC, 24 WDC
Degree of protection:IP 54
Protection class:II
Safety and EMC:according to DIN EN 60730
Set point adjuster:yes
Ambient temperature up to:80
Ambient temperature from:-15
Degree of fouling:II
Accessories:connection set: JZ-06/1
permissible medium temperature:-15...+80°C
Permissible atmospheric humidity:max. 95% r.h., non-condensing
Ciruit Diagram: